JVC HR-S9600EK Select Preset To Watch, Set Counter Display, Reset Counter, Display Remaining Time

Models: HR-S9600EK

1 72
Download 72 pages 6.12 Kb
Page 15
Image 15
Record One Programme While Watching Another

DISPLAY

C.RESET/CANCEL

8

1SELECT PRESET TO WATCH 3

2

TV

PROG

 

Elapsed Recording TimeSET COUNTER DISPLAYRESET COUNTER1 2 3Instant Timer Recording (ITR)Tape Remaining TimeDISPLAY REMAINING TIMEENGAGE ITR MODESET RECORDINGManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background15Manual background

Record One Programme While Watching Another

SELECT PRESET TO WATCH

1 Once recording is in progress, all you need to do is to set the preset controls on the TV for the station you wish to view.

The programme selected with the TV’s preset controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape.

Elapsed Recording Time

Indication

You can check the exact time of a recording.

SET COUNTER DISPLAY

1 Press –:–(or DISPLAY) until a counter reading appears on the dispay panel.

RESET COUNTER

2 Press 0000 (or C.RESET/CANCEL) before starting recording or playback.

1

2

0000

1

–:–

1 2 3

4 5Manual background 6

7 8 9

0

–:–

3

4

4

3

The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.

Instant Timer Recording (ITR)

This easy method allows you to record for any length of time from 30 mins. to 6 hours (selectable in 30-min. increments), and shuts off the recorder after recording is finished.

START RECORDING

Tape Remaining Time

DISPLAY REMAINING TIME

1 Press –:–(or DISPLAY) until the time remaining on the tape appears.

The display panel shows the tape remaining time with "Manual background" displayed.

By pressing the –:–(or DISPLAY) button, you can change the display to show the counter reading, preset position*, clock time or tape remaining time.

*Preset position is not displayed during playback.

NOTE:

Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "– –:– –" may sometimes appear, or the display may blink on occasion.

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. "Manual backgroundManual background" blinks and 0:30 appears on the front display panel.

SET RECORDING

DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.

Page 15
Image 15
JVC HR-S9600EK Select Preset To Watch, Set Counter Display, Reset Counter, Display Remaining Time, Engage Itr Mode