JVC HR-S9600EK VIDEO Plus+ Timer Programming, 1,6 PROG, 16BASICOPERATIONScont, Video Plus+

16BASICOPERATIONS(cont.)

VIDEO Plus+

Timer

Programming

Before performing VIDEO Plus+ Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

LCD panel

With VIDEO Plus+, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

ACCESS VIDEO PLUS+ SCREEN

1	Press PROG.		VIDEO PLUS+
		[0 – 9] : VIDEO PLUS+
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT

The front display panel looks like this:

ENTER PLUSCODE NUMBER

Press the NUMBER keys to	VIDEO PLUS+
enter the PlusCode
	1 2 3 4 5 6 7 8
2 number of the programme
you wish to record, then

1

LCD PROG

2

NUMBER

5 PDC

1,6 PROG

1

2

1

2

		– –:– –
1	2	DAILY
		3
4	5	6
7	8	9
	0
		SP/LP

WEEKLY
3	2
4	7
4

3 OK 2,6

press OK.

●If you make a mistake,

press and input the	[0 – 9] =
	[ ] : DELETE
correct number.
	[PROG] : EXIT

The PlusCode number you enter appears on the front display panel:

The display panel shows only a 4-digit number.

ACCESS VIDEO PLUS+ PROGRAM SCREEN

–	4
STOP+/

You can use the remote control with LCD panel to enter the PlusCode number.

1	ACCESS VIDEO PLUS+ DISPLAY
	Press LCD PROG.
	The LCD panel looks like this:
2	ENTER PLUSCODE NUMBER
	Press the NUMBER keys to enter the PlusCode number of
	a programme you wish to record, then press .

● If you make a mistake, press and input the correct number.

The PlusCode number you enter appears on the LCD panel:

Then go to step 3 in the right column.

	The VIDEO Plus+ Program				– P1 –
	screen appears (if you’re			VIDEO PLUS+ 123456789
3 just starting out, “P1”				START		STOP
			21:00		= 22:00
	appears).			SP	VPS/PDC OFF
	The display panel shows the			DATE		TV PROG
	programme start time.		25.12		1
	Pressing	changes the				BBC 1
	display to the programme			: OK
	stop time, then the date and
	preset position.
				SP

IMPORTANT

Make sure the preset position number you wish to record is displayed; if not, see "VIDEO Plus+ Setup" on page 62 and set the Guide Program number for that PlusCode number correctly.

●If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid PlusCode number.

●If the "GUIDE PROG SET" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 17.