JVC HR-S9600EK setup guide Random As- semble Editing, Prepare for Editing, Press R.A. Edit

42ADVANCEDOPERATIONS(cont.)

Random As- semble Editing

PAUSE/

R.A. EDIT

	Player		IN/OUT	Your recorder
		.		START
		.
		A
		EDIT
.RESET/CANCEL			Video signal
	Audio signal
C
		Another recorder
		(w/PAUSE connector)
Recorder
		REMOTE		Mini-plug Cable
		PAUSE		(Not provided)
				JOG
				8
		LAY
1	3
	2
			MENU	SHUTTLE
		0	4
			4
		1	3	OK
	PROG	2
			PLAY

This function makes it easier to create edited videos when your video recorder is used as the source player in combination with another JVC video recorder equipped with a Remote PAUSE Connector. You can pre-program up to 8 scenes or “cuts” for automatic editing in the sequence you have specified.

You can also perform Random Assemble Editing with a second non-JVC recorder. (☞ pg. 43)

1	MAKE CONNECTIONS
	Connect your recorder’s AV1 IN/OUT or S OUT/
	AUDIO OUT connectors to the VIDEO IN and AUDIO
	IN connectors on the recording deck, and connect your
	recorder’s PAUSE/R.A. EDIT connector to the PAUSE
	connector on the recording deck.
	● If the recording deck doesn’t have a PAUSE connec-
	tor, connect to the R.A. EDIT connector instead.
	● The Mini-plug cable is a mono 3.5 mm mini-plug to
	mono 3.5 mm mini-plug connector.
2	PREPARE FOR EDITING
	Insert the cassette to be recorded on into the recorder
	and set the recorder's input mode.
3	LOAD SOURCE CASSETTE
	Insert the source cassette into your recorder.
4	SET EDIT MODE
	See "Picture Control" on page 35.
5	START SOURCE PLAYBACK
	Press PLAY.
6	ACCESS R.A. EDIT SCREEN
	Press R.A. EDIT.
	PressOR MENU to access MAIN MENU screen and press
	%Þ to move the highlight bar (pointer) to "R.A. EDIT",
	then press OK.
	● The screen is superimposed on the video playback in
	step 7.

￿