Yamaha 01V96 18 , Bus Outs

18 Chapter 3—Selected Channel Window

Studio Manager for 01V96—Owner’s Manual

D Routing, pan & level section

This section contains the routing, pan, and level controls and the, SOLO, and ON buttons

for the currently selected Stereo Input Channel. ROUTING buttons 1–8 are used to route

the channel to the Bus Outs. The STEREO button routes the channel to the Stereo Out. The

DIRECT button routes the channel to its Direct Out, and the Direct Out parameter below

it selects a Direct Out destination. The F.PAN button turns on and off the Bus Out Follow

Pan function. The PAN control is used to pan the channel. The SOLO button is used to solo

the channel, the ON button, to turn on and off the channel, and the channel fader, to set the

channel level.

E AUX SEND section

This section contains the Aux Send controls for the currently selected Stereo Input Channel.

Use the rotary controls to set the Aux Send levels, and click them to turn Aux Sends on and

off. Use the button below each Aux Send control to select pre-fader or post-fader. In Fixed

mode, this button is used to turn Aux Sends on and off (the level is ﬁxed at nominal).

When Aux Sends are paired, a heart icon is displayed between them, and the odd-numbered

Aux Send control sets the level, while the even-numbered control works as a pan control.

F FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the currently selected Stereo

Input Channel. Use the FADER GROUP buttons to add the channel to Fader groups, and

use the MUTE GROUP buttons to add it to Mute groups.

Bus Outs

This is the Selected Channel window for Bus Outs.

234

765