Yamaha 01V96 22 , Remote Channels

22 Chapter 3—Selected Channel Window

Studio Manager for 01V96—Owner’s Manual

C DELAY section

This section contains the delay controls for the Stereo Out. The rotary control is used to set

the delay time, and the ON button turns the Delay function on and off.

D Balance & level section

This section contains the balance control and ON buttons, and channel fader for the Stereo

Out.

E COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected

Stereo Out. Its layout is identical to the COMPRESSOR section for Input Channels except

there is no LINK button. See “COMPRESSOR section” on page 16 for more information.

F INSERT section

This section contains the Insert parameters for the Stereo Out. The INSERT button turns

the Insert on and off. The OUT and IN parameters are used to specify the insert out desti-

nation and insert in source respectively. The POSITION parameter is used to specify the

position of the Insert in the signal path.

G FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the Stereo Out. Use the

FADER GROUP buttons to add the Stereo Out to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

Remote Channels

This is the Selected Channel window for the

Remote Channels.

A CHANNEL SELECT section

Channels can be selected by clicking the

Channel ID and choosing from the list that

appears, or by clicking the left and right

Channel Select buttons. The long channel

name is displayed below the Channel ID.

B Remote Channel Level section

This section contains the ON button and the

channel fader for the currently selected

Remote Channel.

Note: When the remote target setting on the

01V96 is set to anything other than User

Deﬁned, the ON buttons and channel faders

have no effect, and the name of the speciﬁed

target is displayed below the channel ID.