Yamaha 01X LOGIC: On the 01X, set Remote Select (page 87) in the Utility mode to LOGIC.

106

Remote Function List

01X Owner’s Manual

Before Using Basics Section AppendixGetting Started Reference

■LOGIC: On the 01X, set Remote Select (page 87) in the Utility mode to “LOGIC.”

Button Function LED

Notes

(page 114)

In all modes:

[NAME/VALUE] Changes the indication of the parameter name and its value. —

[SHIFT]+[NAME/VALUE] Changes the meter display mode. —

[PAGE SHIFT]+DISPLAY [ / ]

Cursor [ / ]

(Multi Channel View)

(Parameters other than PAN/NSTRUMENT

mode)

Changes the Slot number. —

[SHIFT]+[REMOTE] Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-

cel the mode. ﬂashes *5

[SEL] (in normal status) Selects a channel. lights/goes out *1, 2

[SEL] ([SEL] ﬂashes) Fader touch-out (page 15) ﬂashes ➝

goes out

[SEL] ([AUTO EDIT] lights) Fader touch-in (page 15) ﬂashes

[ON] (in normal status) Turns each channel off or on (mutes/unmutes the signal). lights/goes out *1, 2

[SHIFT]+[ON] (in normal status) Turns all the channels on. lights *1, 2, 6, 7

[ON] ([SOLO] lights) Sets Solo for each channel to on or off. lights/goes out *2

[SHIFT]+[ON] ([SOLO] lights) Sets Solo for all channels to off (excepting the master channel). goes out *2

[ON] ([REC RDY] lights) Sets the REC RDY of each channel to on or off. lights/goes out *2

[SHIFT]+[ON] ([REC RDY] lights) Sets REC RDY for all channels to off (excepting the master channel). goes out *2

[ON] ([AUTO R/W] lights) Switches the automation status of the selected channel (only that channel) in order:

Latch, Touch, Read and Off. lights/goes out *2

[SHIFT]+[ON] ([AUTO R/W] lights) Switches the automation status (Read/Off) of all channels. lights/goes out *2, 7, 8

[AUTO EDIT] Changes the function of the [SEL] button to the touch-in function. This button ﬂashes

during automation touch-in. lights

[SOLO] Changes the function of the [ON] button to the Solo function. lights

[REC RDY] Changes the function of the [ON] button to the REC RDY function. lights

[AUTO R/W] Changes the function of the [ON] button to the AUTO R/W function. lights

[AUDIO] Makes the Global View mode active and displays the Audio track with the Multi Channel

view. Pressing this again restores the normal track display. lights *9

[INST] Makes the Global View mode active and displays the Audio Instrument track with the

Multi Channel view. Pressing this again restores the normal track display. lights *9

[MIDI] Makes the Global View mode active and displays the MIDI track with the Multi Channel

view. Pressing this again restores the normal track display. lights *9

[BUS/AUX]

Makes the Global View mode active and displays the AUX object, BUS object, AUDIO

OUTPUT object with the Multi Channel view.

Pressing this alternates among the following displays, in order: Bus Track, Aux Track,

Output Track and Normal Track.

lights *9

[OTHER] Makes the Global View mode active and displays the AUDIO INPUT object with the

Multi Channel view. Pressing this again restores the normal track display. lights *9

BANK [</>]Scrolls through the track indication every eight channels. —

[SHIFT]+BANK [</>]Scrolls through the track indication channel-by-channel. —

[FLIP] Exchanges the functions between the Channel Knobs and the Faders. lights

[SHIFT]+[FLIP] Assigns the function of the Channel Knob to the Fader. ﬂashes

[EDIT] Turns Nudge on or off. lights/goes out

[SHIFT]+[EDIT] Enters the Nudge Option mode. —

[LOOP] Turns Loop on or off. lights/goes out

[SHIFT]+[LOOP] Enters the Cycle Option mode. —

[F1] – [F7] Calls up Screen Sets 1 – 7. —

[SHIFT]+[F1] Brings the Track View window to the front of the computer screen. —

[SHIFT]+[F2] Displays the Mixer window —

[SHIFT]+[F3] Displays the List window. —

[SHIFT]+[F4] Closes the current window. —

[SHIFT]+[F5] Displays the Piano Roll window. —

[SHIFT]+[F6] Displays the Score window —

[SHIFT]+[F7] Displays the Audio window —

[SHIFT]+[F8] Shows the Transport Bar. —

[UNDO] Executes the Undo operation. —

[SHIFT]+[UNDO] Executes the Redo operation. —