Yamaha 01X Cubase/NUENDO: On the 01X, set Remote Select (page 87) in the Utility mode to CUBASE.

108

Remote Function List

01X Owner’s Manual

Before Using Basics Section AppendixGetting Started Reference

■Cubase/NUENDO: On the 01X, set Remote Select (page 87) in the Utility mode to “CUBASE.”

Knobs 1 – 8 (pressing)

(Parameter page) Reset the parameter value to the default. (Some parameters cannot be reset.) —

DISPLAY [ / ]

Cursor [ / ]

(Parameter page)

Changes the page. (Page is displayed at the right of the LCD.) —

[SHIFT]+[PLUG-IN] Return to the PLUG-IN mode from PLUG-IN parameter pages. —

INSTRUMENT mode [SHIFT]+[INST] (Multi Channel View)

[SHIFT]+[INST] ➝ [SHIFT]+[INST] (Track Parameter View) lights *28

Knobs 1 – 8

(turning ➝ pressing)

Turn the knob to select the desired instrument for insertion (indication ﬂashes), then

press the knob to actually enter the selected setting. —

Knobs 1 – 8 (pressing)

(Knob to which the Instrument is assigned) Calls up the parameter page and displays the Editor window on Logic. —

Knobs 1 – 8 (turning)

(Parameter page) For editing parameters. —

Knobs 1 – 8 (pressing)

(Parameter page) Reset the parameter value to the default. (Some parameters cannot be reset.) —

DISPLAY [ / ]

Cursor [ / ]

(Parameter page)

Changes the page. (Page is displayed at the right of the LCD.) —

[SHIFT]+[INST] IReturn to the INSTRUMENT mode. —

No function

[WRITE]

Button Function LED

Notes

(page 114)

In all modes:

[NAME/VALUE] Changes the indication of the parameter name and its value. —

DISPLAY [ / ] Calls up the next/previous page. —

[SHIFT]+DISPLAY [ ] Calls up the ﬁrst page. —

[SHIFT]+DISPLAY [ ] Calls up the last page. —

[SHIFT]+[REMOTE] Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-

cel the mode. ﬂashes *5

[SEL] (in normal status) Selects a channel. lights/goes out *2

[SEL] ([SEL] ﬂashes) Fader touch-out (page 15) ﬂashes ➝

goes out

[SEL] ([AUTO EDIT] lights) Fader touch-in (page 15) ﬂashes

[ON] (in normal status) Turns each channel off or on (mutes/unmutes the signal) lights/goes out *2

[SHIFT]+[ON] (in normal status) Turns all the channels on. lights *2, 12, 13

[ON] ([SOLO] lights) Sets Solo for each channel to on or off. lights/goes out *2

[SHIFT]+[ON] ([SOLO] lights) Sets Solo for all channels to off, lights/goes out *2, 12

[ON] ([REC RDY] lights) Sets the REC RDY of each channel to on or off. lights/goes out *2

[ON] ([AUTO R/W] lights) Switches the automation status of the selected channel (only that channel) in order: Off,

Read and Read + Write. lights/goes out *14

[SHIFT]+[ON] ([AUTO R/W] lights) Switches the automation status of all channels in order: Off, Read, Read + Write, Write

(or Off, Write, Write + Read, Read). lights/goes out *2, 14

[AUTO EDIT] Changes the function of the [SEL] button to the touch-in function. This button ﬂashes

during automation touch-in. lights

[SOLO] Changes the function of the [ON] button to the Solo function. lights

[REC RDY] Changes the function of the [ON] button to the REC RDY function. lights

[AUTO R/W] Changes the function of the [ON] button to the AUTO R/W function. lights

BANK [</>]Scrolls through the track indication every eight channels. —

[SHIFT]+BANK [</>]Scrolls through the track indication channel-by-channel. —

[FLIP] Exchanges the functions between the Channel Knobs and the Faders. lights

[EDIT] Opens the Edit window for the currently selected block (AUDIO/MIDI). —

[LOOP] Turns Loop on or off. lights/goes out

[F1] – [F8] [F1] – [F8] as deﬁned in Cubase/Nuendo. —

[SHIFT]+[F1] Brings the Track View window to the front of the computer screen. —

Button Function LED

Notes

(page 114)