01X Owner’s Manual
Remote Function List
113
Before UsingBasics SectionAppendix Getting StartedReference
PAN mode [PAN] ( or [SHIFT]+[PAN] ➝ Knob) lights *26
Knobs 1 – 8 (turning) For editing parameters. —
Knobs 1 – 8 (pressing)
(Surround Audio Channel)
Enters the PANNER Effect Edit mode. Press the [EDIT] button to return to the PAN
mode. —
[SHIFT]+Knobs 1 – 8 (pressing) Resets the edited parameter to the default value (center). —
[FLIP] Switches the functions of the Channel Knobs and the Faders. lights *37
[PAN] in the PAN mode Turns the Meter on or off. —
SndVal mode [SEND] ( or [SHIFT]+[PAN] ➝ Knob) *26
Knobs 1 – 8 (turning) For editing parameters. —
DISPLAY [ / ]
Cursor [ / ] Changes the Send number. — *11
Knobs 1 – 8 (pressing) Sets Mute to on or off. —
[SHIFT]+Knobs 1 – 8 (pressing) esets the parameter value to the default (0 dB). —
[FLIP] Switches the functions of the Channel Knobs and the Faders. lights *37
[SEND] in the SndVal mode Turns the Meter on or off. —
SndOut mode [SHIFT]+[PAN] ➝ Knobs
DISPLAY [ / ]
Cursor [ / ] Changes the Send number. — *11
Knobs 1 – 8 (turning) Selects the bus for each Send of the track. —
Knobs 1 – 8 (pressing)
(except when selecting a bus) Switches between Send PRE and POST. — *26
Input mode [SHIFT]+[PAN] ➝ Knob
Knobs 1 – 8 (turning) Selects an input bus for a track. —
Output mode [SHIFT]+[PAN] ➝ Knob
Knobs 1 – 8 (turning) Selects an output bus for a track. —
Effect mode [SHIFT]+[DYNAMICS] ( or [SHIFT]+[PAN] ➝ Knob) [DYNAMICS]
lights *34
Knobs 1 – 8 (turning) Selects a Plug-in Effect for each track. —
DISPLAY [ / ]
Cursor [ / ] Changes the Effect Number. — *11, 35
Knobs 1 – 8 (pressing) Turns the Effect Bypass on or off. When the bus is turned on, X is indicated above the
Effect name. — *19
[EQ LOW]/[EQ LOW-MID]/
[EQ HIGH-MID]/[EQ HIGH]
+Knobs 1 – 8 (pressing)
Assigns the Parametric EQ to the corresponding track. —
[EDIT] (when any track is selected) Enters the Plug-in Effect Edit mode. Press [EDIT] again to exit from the Edit mode. lights/goes out *21, 27,
35
Effect Edit mode [SHIFT]+[PAN] ➝ Knob
[DYNAMICS]
[EDIT]
lights
*34
Knobs 1 – 8 (turning) For editing parameters. —
DISPLAY [ / ]
Cursor [ / ] Changes an Effect Number. *11
Cursor [ / ] Calls up the Effect of a different track.
[SHIFT]+BANK [</>]Changes the parameters to be edited with the Knobs in order one by one.
BANK [</>]Changes the parameters to be edited with the Knobs in groups of eight.
[FLIP] Switches the functions of the Channel Knobs and the Faders. lights *37
Prefs mode [SHIFT]+[PAN] ➝ Knob
[DYNAMICS]
[EDIT]
lights
Knobs 1 – 8 (pressing)
• LvlMtr........Turns the Meter indication on or off. (the same as [SHIFT]+[NAME/
VALUE])
• SrlTks........ Determines whether the displayed tracks of the 01X and those of the mix-
ing board in Digital Performer are synchronized or not.
• FtSwtc........Switches between the footswitch assignments: PLAY/REC, or F5/F6 (on
computer keyboard).
—
No function
[WRITE] [F1] – [F8] [SHIFT]+[F8]
Button Function LED
Notes
(page 114)