Yamaha 01X SONAR: On the 01X, set Remote Select (page 87) in the Utility mode to SONAR.

110

Remote Function List

01X Owner’s Manual

Before Using Basics Section AppendixGetting Started Reference

■SONAR: On the 01X, set Remote Select (page 87) in the Utility mode to “SONAR.”

Button Function LED

Notes

(page 114)

In all modes:

[NAME/VALUE] Changes the indication of the parameter name and its value. —

[SHIFT]+[NAME/VALUE] Turns the Meter indication on or off. — *19

DISPLAY [ / ] (Multi Channel) Changes the parameter to be edited via a Knob in order one by one. —

[PAGE SHIFT]+DISPLAY [ / ]

(Multi channel) Changes the parameters to be edited via a Knob in groups of eight. —

DISPLAY [ / ]

(SELECTED CHANNEL) Changes the indicated parameter in order one by one. —

[PAGE SHIFT]+DISPLAY [ / ]

(SELECTED CHANNEL) Changes the indicated parameters in groups of eight. —

[SHIFT]+[REMOTE] Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-

cel the mode. ﬂashes *5

[SEL] (in normal status) Selects a channel. lights/goes out *2

[SEL] ([SEL] ﬂashes) Fader touch-out (page 15) ﬂashes ➝

goes out

[SEL] ([AUTO EDIT] lights) Fader touch-in (page 15) ﬂashes

[ON] (in normal status) Turns each channel off or on (mutes/unmutes the signal). lights/goes out *2, 32

[SHIFT]+[ON] (in normal status) Turns all channels on. lights *2, 32

[ON] ([SOLO] lights) Sets Solo for each channel to on or off. lights/goes out *2

[SHIFT]+[ON] ([SOLO] lights) Sets Solo for all channels to off, goes out *2

[ON] ([REC RDY] lights) Sets the REC RDY of each channel to on or off. lights/goes out *2

[SHIFT]+[ON] ([REC RDY] lights) Sets the REC RDY of all channels to off. goes out *2

[AUTO EDIT] Changes the function of the [SEL] button to the touch-in function. This button ﬂashes

during automation touch-in. lights

[SOLO] Changes the function of the [ON] button to the Solo function. lights

[REC RDY] Changes the function of the [ON] button to the REC RDY function. lights

[AUTO R/W]+[ON] This arms or activates fader automation. lights *2

[AUTO R/W]+Knob This arms or activates the parameters assigned to the respective knobs. (This is not indi-

cated on the 01X.) —

[AUDIO] Assigns a Track to a Fader. —

[INST] Assigns a Track to a Fader. —

[MIDI] Assigns a Track to a Fader. —

[BUS/AUX] Assigns an AUX BUS to a Fader. —

[OTHER] Assigns output level adjustment of the Virtual Main Bus to the Faders. —

BANK [</>]Scrolls through the track indication every eight channels. —

[SHIFT]+BANK [</>]Scrolls through the track indication channel-by-channel. —

[FLIP] Assigns the functions of the Channel Knobs to the Faders. ﬂashes

[FLIP] ➝ [FLIP] Switches the functions of the Channel Knobs and the Faders. lights

[EDIT] Switches the current window. —

[LOOP] Sets Loop to on or off. lights/goes out

[F1] – [F8] [F1] – [F8] as deﬁned in SONAR. —

[SHIFT]+[F1] The same as [F1] as deﬁned in SONAR. —

[SHIFT]+[F2] The same as [F2] as deﬁned in SONAR. —

[SHIFT]+[F3] The same as [F3] as deﬁned in SONAR. —

[SHIFT]+[F4] Closes the current window. —

[SHIFT]+[F5] The same as [F5] as deﬁned in SONAR. —

[SHIFT]+[F6] The same as [F6] as deﬁned in SONAR. —

[SHIFT]+[F7] The same as [F7] as deﬁned in SONAR. —

[SHIFT]+[F8] The same as [F8] as deﬁned in SONAR. —

[UNDO] Executes the Undo operation. —

[SHIFT]+[UNDO] Executes the Redo operation. —

[SAVE] Executes the Save operation. —

[WRITE] Opens the window for entering the Marker to the current song position. —

[MARKER] Turns the Marker on or off. —

[r]Reverse (or Rewind). When the Marker is turned on, this operation moves the song posi-

tion to the previous Marker. — *33

[SHIFT]+[r]Moves the song position to the top of the song. When the Marker is turned on, this oper-

ation opens the window for entering the Marker. —