UP DN

UP

DN

E

EMU00295

PROCEDURE FOR TILTING UP

Power tilt / Power trim/tilt model

1)Remove the fuel-line connection from the motor. (If the connector is provid- ed on the motor.)

2)Push the power tilt / power trim/tilt switch “UP” until the outboard has

701034*

tilted up completely.

UP

DN

302021*

3) Turn the tilt-support lever toward you and support the engine.

w

After tilting the engine, be sure to support it with the tilt-support lever. Otherwise, the engine could fall back down suddenly if oil in the power tilt / power trim/tilt unit should lose pressure.

403011*

Power trim/tilt model

4) Once the engine is supported with the tilt-support lever, push the power trim/tilt switch DOWN to retract the trim rods.

411014

3-20