E

OPEN

CLOSE

214013

1)Adjust the trim angle so that the drive shaft is at right angles to the water surface or is trimmed in.

2)Open the emergency starter valve located behind the silencer cover on the front side.

3)Squeeze the priming pump two or three times to feed fuel.

902025

4)Open the throttle slightly without

N

shifting using the throttle control grip,

 

 

 

 

neutral throttle lever or free accelera-

 

 

tor. (It is necessary to change the

 

 

throttle opening slightly depending

 

 

on the engine temperature.)

 

 

After the engine starts, return the

 

 

throttle to the original position.

 

5) Set the MAIN SWITCH to “ON”.

 

701014

6)Set the MAIN SWITCH to “START”.

 

 

 

 

 

 

cC

 

 

 

 

 

 

 

8Do not turn the main switch to

ON

START

 

 

 

“START” when the engine is running.

OFF

 

 

 

8Do not keep the starter-motor turning

 

 

 

 

 

 

 

 

 

 

 

 

for more than 5 seconds. The battery

 

 

 

 

 

 

will rapidly become exhausted and it

 

 

 

 

 

 

will be impossible for the starter-motor

 

 

 

 

 

 

to start the engine. If the engine does

 

 

 

701022

 

 

not start within 5 seconds, return the

 

 

 

 

 

main switch to “ON”, wait 10 seconds,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and then crank the engine again.

 

 

 

 

5-9