E

q

r

w

e

207013

4)Reinstall the filter element in the cup. Make sure the O-ring in position in the cup. Firmly screw the cup onto the filter housing.

5)Attach the filter assembly to the bracket with that the fuel hoses are attached to the filter assembly.

6)Run the engine and check the filter and lines for leaks.

1Filter element

2 O-ring

3 Filter cup

4 Filter housing

EMK54110

ADJUSTING IDLING SPEED

w

8Do not touch or remove electrical parts when starting or during operation.

8Keep hands, hair and clothes away from flywheel and other rotating parts while engine is running.

cC

This procedure must be performed while the outboard motor is in the water. A flushing attachment or test tank can be used.

Procedure

NOTE:

A diagnostic tachometer should be used for this procedure.

1)Start the engine and allow it to warm up fully in Neutral until it is running smoothly. If the outboard is mounted on a boat, be sure the boat is tightly moored.

4-14