E
60/70 q
1
w
2
216011
q | 90 |
|
w216012
EMN32311
ENGINE FAILS TO OPERATE
If battery voltage is low or in the unlikely event of an ignition system malfunction, the engine speed may become erratic or the engine may stop. In such a case, disconnect the connection on the yellow cord (emergency circuit) to return to port.
w
When the connection is disconnected, the idling and low speeds are slightly higher than normal. Use care when starting off or stopping.
cC
Follow this procedure only in an emergency and just long enough to return to port for repairs.
1CDI unit
2 Yellow cord
EMU00955*
COLD ENGINE FAILS TO START
If a cold engine fails to start for prime start model, use the following procedure.
w
When starting or operating the engine, do not touch the ignition coil, high voltage wire, spark plug cap or other electrical parts carrying high voltage. Keep loose clothing and other objects away from the engine when starting it with an emergency starter rope. An unguarded rotating flywheel is very dangerous. Do not attempt to replace the top cowling when the engine is running. Proceed at once to the nearest port to get the engine repaired. Take care to prevent water splashing onto the flywheel.