E
MAINTENANCE CHART
Frequency of maintenance operations may be adjusted according to the operating con- ditions, but the following table gives general guidelines.
The mark (7) indicates the
| Interval |
| Initial | Every | Refer | ||
|
|
|
|
|
| ||
|
|
|
| 50 hours | 100 hours | 200 hours | |
Item |
| 10 hours | Page | ||||
| (3 months) | (6 months) | (1 year) | ||||
|
|
|
| ||||
Carburetor | Cleaning | 1 |
| 1 | 1 | — | — |
Cooling water passages | Cleaning |
|
| ● | ● |
| |
Fuel filter | Cleaning | ● |
| ● | ● |
| |
Fuel system | Inspection | ● |
|
| ● | 1 | |
Throttle link | Inspection/Adjustment |
|
|
|
| 1 | — |
Idling speed | Inspection/Adjustment | ● |
|
| ● |
| |
Spark plug | Cleaning/Adjustment/Replacement | ● |
| ● | ● |
| |
Oil tank water drain | Cleaning | ● |
| ● | ● |
| |
Oil pump | Inspection/Adjustment | 1 |
|
|
|
| — |
Power trim and tilt system | Inspection | ● |
| ● | ● | ● | |
Wiring & Connectors | Inspection/Reconnect | ● |
| ● | ● |
| |
Exhaust leakage | Inspection | ● |
| ● | ● |
| |
Water leakage | Inspection | ● |
| ● | ● |
| |
Grease points | Greasing |
|
|
| ● |
| |
Gear oil | Change | ● |
|
| ● |
| |
Bolts & Nuts | Retightening | ● |
| ● | ● |
| |
Cowling clamp | Inspection |
|
|
|
| ● | — |
Anode | Inspection |
|
| ● | ● |
| |
Propeller | Inspection | ● |
| ● | ● |
| |
Motor exterior | Inspection | ● |
| ● | ● |
| |
Battery | Inspection | ● |
| (every month) |
|
|
NOTE:
Cooling water passages;
When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.