E
403011*
q
EMD60010
TILT SUPPORT LEVER
To keep the outboard motor in the tilted- up position, lock the tilt support lever to the clamp bracket.
EMD63111
TOP COWLING LOCK LEVERS
To remove the engine top cowling, turn the front lock lever and rear lock lever(s). Then lift off the cowling. When replacing the cowling, check to be sure it fits properly in the rubber seal. Then lock the cowling again by returning the levers to the locked position.
q
q
301042*
301041*
000945
1Top cowling lock lever
EMU01146
FLUSHING DEVICE
This device 1 is used to clean the cooling water passages of the motor using a garden hose and tap water.
NOTE:
Refer to “Cleaning