E
ON
EMG38010
STOPPING ENGINE
Let it cool off for a few minutes at idle or low speed first. Stopping the engine immediately after operating at high speed is not recommended.
EMG41211
PROCEDURE
1)Turn the main switch to “OFF”.
OFF
START
701023
304034*
NOTE:
The engine can also be stopped by pulling the lanyard from the engine stop switch (then turning the main switch to “OFF”).
2)If the fuel joints are provided, discon- nect the fuel line from the motor after stopping the engine.
3)Tighten the air vent screw on the fuel tank cap after stopping the engine, if it is equipped.
4)Remove the key if the boat will be left unattended.
902052