E

cC

Do not leave the garden-hose connector loose on the bottom cowling fitting or let the hose hang free during normal opera- tion. Water will leak out of the connector instead of cooling the engine, which can cause serious overheating. Be sure the connector is tightened securely on the fitting after flushing the engine.

NOTE:

8When flushing the engine with the boat in the water, tilting up the engine until it is completely out of the water will achieve better results.

8Refer to cooling system flushing instructions in “TRANSPORTING AND STORING OUTBOARD MOTOR”.

EMU00412

Checking Painted Surface of Motor

Check the motor for scratches, nicks, or flaking paint. Areas with damaged paint are more likely to corrode. If necessary, clean and paint the areas. A touch-up paint is available from a Yamaha dealer.

EML44010

COATING THE BOAT BOTTOM

A clean hull improves boat performance. The boat bottom should be kept as clean of marine growths as possible. If neces- sary, the boat bottom can be coated with an anti-fouling paint approved for your area to inhibit marine growth.

102025Do not use anti-fouling paint which includes copper or graphite. These paints

can cause more rapid engine corrosion.

4-27