E

EMK26111

Lubrication

1)Remove the spark plugs, and spray a 10 second spray of “Yamaha Stor- Rite Engine Fogging Oil” into each cylinder. Grease the spark plug threads and reinstall the spark plugs and torque to proper specification. (Refer to “CLEANING AND ADJUST- ING SPARK PLUG”.)

2)Turn the engine over with the stop lanyard disconnected to work the fog- ging oil into the piston rings.

3)Fill the oil tanks. This prevents the for- mation of condensation. For models with a remote tank, it may be neces- sary to manually override the control unit to completely fill the engine main tank. (Refer to “TEMPORARY ACTION IN EMERGENCY”).

4)Change the lower unit oil. (Refer to “CHANGING GEAR OIL”). Inspect the oil for the presence of water which indicates a leaky seal. Seal replace- ment should be performed by an authorized Yamaha dealership prior to use.

5)Grease all grease fittings. (Refer to “GREASING”)

EMK27011

Cleaning and Anti-corrosion Measure

1)Wash down the exterior of the out- board with fresh water and dry off completely.

2)Spray the engine’s exterior with “Yamaha Silicone Protectant” (Part No. LUB-SILCNE-13-00).

3)Wax the cowling with a non-abrasive wax such as “Yamaha Silicone Wax” (Part No. ACC-11000-15-02).

4-6