E

cC

Be sure to retract the trim rods completely during mooring. This protects the rods from marine growths and corrosion which could damage the power trim/tilt mechanism.

EMU00304

PROCEDURE FOR TILTING DOWN

Power tilt / Power trim/tilt model

1)Push the power tilt / power trim/tilt switch “UP” until the engine is sup- ported by the tilt rod.

2)Release the tilt-support lever.

3)Push the power tilt / power trim/tilt

411021switch “DN”(Down) to lower the engine to the desired position.

EMH60010

CRUISING IN OTHER

CONDITIONS

CRUISING IN SALT WATER

After operating in salt water, wash out the cooling-water passages with fresh water to prevent them from becoming clogged- up with salt deposits.

NOTE:

Refer to cooling system flushing instructions in “TRANSPORTING AND STORING OUTBOARD MOTOR”.

CRUISING IN TURBID WATER

It is strongly recommended that the optional chromium-plated water-pump kit be installed if the outboard is to be used in turbid (muddy) water conditions.

3-21