Additional Information

Adjust the volume level

Press VOLUME +/– to adjust the volume level.

Up

Down

The color of qD DTS indicator changes depending on the adjustable range. Green indicates a lower volume level, orange a moderate level, and red a higher level.

Note

Note that when the qD DTS indicator is red, the volume is set to a higher level. Excessive sound may damage your hearing or bother others.

y

To turn off the volume temporarily, press

MUTE.

To resume the volume, press MUTE again or press VOLUME +/–.

Adjust the subwoofer level

Press SUBWOOFER +/– to adjust the bass level.

The color of qD DTS indicator changes depending on the bass level. Green indicates a minus level, orange a standard level (default value is 0), and red a plus level.

Audio delay control

You can use this function to delay sound to synchronize with a lagging video image.

1 Press and hold AUDIO DELAY more than 3 seconds to enter adjustment mode.
Flashes in green (☞ P. 11)
2 Press SUBWOOFER +/– to adjust the delay time. (+ increases the delay time)
Make the delay time longer
Make the delay time shorter

The color of qD DTS indicator changes depending on the adjustable range. Green indicates a shorter delay time, orange a medium delay, and red a longer delay.

3 Press AUDIO DELAY to exit the adjustment mode.

y

The adjustment mode is canceled if the unit is left for 20 seconds without any operation being performed.

Additional Information

Using an external subwoofer

Although the unit has a subwoofer built-in, you can use commercially available powered subwoofer of your choice. Refer to “Alternative connections” (☞ P. 5).

1 Set the unit to standby mode.

2 Press both the VOLUME – button and button of the main unit, release the button first, then release the VOLUME – button.

This unit is turned on when switching between the built-in subwoofer and external subwoofer.

The SURROUND indicator lights up as the following illustration. Check if the setting is correct. (☞ P. 11)

Built-in External
subwoofer subwoofer

TheSURROUND indicator (for 2 seconds after the unit is turned on)

Green

No light

•The default setting is playback of the built-in subwoofer.

•You can verify the current setting by turning the unit on again from standby mode.

Note

You cannot use the built-in subwoofer and the external subwoofer simultaneously.

8En