Yamaha AV Receiver owner manual 2ch Stereo, Straight, Downmixing to 2 channels, Virtual CINEMA DSP

■Downmixing to 2 channels

You can enjoy 2-channel stereo playback even from multi- channel sources.

Rotate PROGRAM (or press AMP to select the AMP mode, then press STEREO on the remote control) to select 2ch Stereo.

PROGRAM

	AMP	STEREO
or
		1
Front panel		Remote control

PLAYBACK

■Virtual CINEMA DSP

Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers. It creates virtual speakers to reproduce the natural sound field.

If you set “SUR. LR” to NONE (see page 58), Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP sound field program.

Note

Virtual CINEMA DSP will not activate, even when “SUR. LR” is set to NONE (see page 58) in the following cases:

–When MULTI CH INPUT is selected as the input source.

–When headphones are connected to the PHONES jack.

2ch Stereo

y

You can use a subwoofer with this program when SWFR or BOTH is selected in “BASS OUT”.

■Listening to unprocessed input signals

In STRAIGHT mode, two channel stereo sources are output from only the front left and right speakers. Multi- channel sources are decoded straight into the appropriate channels without any additional effect processing.

Press STRAIGHT (or press AMP to select the AMP mode, then press STRAIGHT on the remote control) to select STRAIGHT.

STRAIGHT		STRAIGHT
		AMP
	or	ENT.
EFFECT		EFFECT
Front panel		Remote control

STRAIGHT

Press STRAIGHT (EFFECT) again so that “STRAIGHT” disappears from the display when you want to turn the sound effect back on.

OPERATION BASIC

31