Yamaha AV Receiver Selecting input modes, Displaying information about the input source, Straight

PLAYBACK

Selecting input modes

This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use.

1Rotate INPUT to select the input source.

INPUT

2Press INPUT MODE to select an input mode. In most cases, use AUTO.

INPUT MODE

VCR V-AUX DTV/CBL DVD MD/CD-R TUNER CD

VOLUME

SP
A	dB
	L R

Input source		Input mode
AUTO	Automatically selects input signals in
	the following order:
	1) Digital signals*
	2) Analog signals
DTS	Selects only digital signals encoded in
	DTS. If no DTS signals are input, no
	sound is output.
ANALOG	Selects only analog signals. If no
	analog signals are input, no sound is
	output.

*If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate decoder.

y

You can adjust the default input mode of this unit (see page 60).

Notes

•When playing a DTS-CD/LD, be sure to set INPUT MODE to DTS.

•If the digital output data of the player has been processed in any way, you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player depending on the player.

■Displaying information about the input

source

You can display the type, format and sampling frequency of the current input signal.

1Select the input source.

CD MD/CD-R TUNER SLEEP

DVD	DTV/CBL	V-AUX	MULTI CH IN
VCR			AMP

2Press AMP to select the AMP mode, then press STRAIGHT so that “STRAIGHT” appears in the display.

STRAIGHT

AMP

then ENT.

EFFECT

STRAIGHT

32