CAUTION: Read this before operating your unit.
| 1. To assure the finest performance, please read this | 13. Do not connect any audio equipment to the AC outlet | ||
| manual carefully. Keep it in a safe place for future | on the rear panel if the equipment requires more power | |
| reference. | than the outlet is rated to provide. | |
| 2. Install this unit in a cool, dry, clean place – away from | 14. VOLTAGE SELECTOR | ||
| windows, heat sources, sources of excessive vibration, | (China and General models only) | |
| dust, moisture and cold. Avoid sources of humming | The voltage selector on the rear panel of this unit | |
| (transformers, motors). To prevent fire or electrical | must be set for your local main voltage BEFORE | |
| shock, do not expose the unit to rain or water. | plugging into the AC main supply. | |
3. | Never open the cabinet. If something drops into the | Voltages are 110/120/220/240 V AC, 50/60 Hz. | |
| set, contact your dealer. |
| |
| When this unit is turned off by pressing the STANDBY/ON | ||
| 4. Do not use force on switches, controls or connection | |||
| switch on the front panel or the remote control, the | |||
| wires. When moving the unit, first disconnect the | STANDBY indicator on the front panel lights up. This state | |
| power plug and the wires connected to other | is called the standby mode. In this mode, this unit is | |
| equipments. Never pull the wires themselves. | designed to consume a small amount of power. This | |
5. | The openings on the unit cover assure proper | unit’s power supply is completely cut off from the AC line | |
| ventilation of the unit. If these openings are | only when the POWER switch on the front panel is set in | |
| the OFF position or the AC power cord is disconnected. | ||
| obstructed, the temperature inside the unit will rise | ||
|
| ||
| rapidly; therefore, avoid placing objects against these |
| |
| openings. Install the unit in a | For Canadian Customers | |
| prevent fire or damage. | To prevent electric shock, match wide blade of plug to | |
| <Europe, U.K. and China models only> | wide slot and fully insert. | |
| Be sure to allow a space of at least 20 cm behind, 20 | This Class B digital apparatus complies with Canadian | |
| cm on both sides and 30 cm above the top panel of the | ||
| |||
| unit to prevent fire or damage. | ||
|
| ||
| on this unit. Using this unit with a higher voltage than | WARNING |
|
| |
|
|
|
| ||
| specified is dangerous and may result in fire or other | Do not change the IMPEDANCE SELECTOR switch | |||
| accidents. YAMAHA will not be held responsible for | setting while the power to this unit is on, otherwise | |||
| any damage resulting from use of this unit with a | this unit may be damaged. |
| ||
| voltage other than specified. | If this unit fails to turn on when the POWER switch is | |||
7. | Always set the VOLUME control to “∞” before starting | ||||
| pressed: |
|
| |||
| the audio source play. Increase the volume gradually | The IMPEDANCE SELECTOR switch may not be set to | |||
| to an appropriate level after the play has been started. | either end. If so, set the switch to either end when this | |||
8. | Do not attempt to clean the unit with chemical solvents | unit’s power supply is completely cut off. | |||
| as this might damage the finish. Use a clean, dry |
|
| (U.S.A. model) | |
| cloth. |
|
| ||
|
|
|
| ||
9. | Be sure to read the “TROUBLESHOOTING” section | SPEAKERS |
|
| |
R | L |
| |||
|
| A |
| MAINS | |
| regarding common operating errors before concluding |
|
| l00W MAX. TOTAL | |
|
|
|
| AC OUTLETS | |
|
|
|
| SWITCHED | |
|
|
|
| I20V 60Hz | |
| that the unit is faulty. | CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING. |
| ||
|
| SET BEFORE POWER ON | |||
|
| R L | IMPEDANCE SELECTOR | ||
10. | When not planning to use this unit for a long period | B | A OR B : 4ΩMIN. /SPEAKER | A OR B : 6ΩMIN. /SPEAKER | |
|
|
| A B : 8ΩMIN. /SPEAKER | A B : I2ΩMIN. /SPEAKER | |
| (ie., vacation, etc.), disconnect the AC power plug from |
|
|
| |
| the wall outlet. |
|
|
| |
11. | To prevent lightning damage, disconnect the AC power |
|
|
| |
| plug when there is an electric storm. | IMPEDANCE SELECTOR | |||
12.Grounding or polarization – Precautions should be taken so that the grounding or polarization of an appliance is not defeated.