Yamaha AX-596 BASS, INPUT, PHONES, TREBLE, FVOLUME, ABALANCE, 9SPEAKERS, BLOUDNESS, SPEAKERS A, 8PHONES jack, DFront cover, 0Tone controls, EINPUT selector

8PHONES jack

When you listen with headphones, connect the headphones to the PHONES jack and set both SPEAKERS A and B switches to the OFF position.

PHONES

9SPEAKERS

Press the switch A or B (or both) inward (ON) for the speakers you will use. Press and release the switch outward (OFF) for the speakers you do not use.

0Tone controls

BASS

Rotate this knob to increase or decrease the low frequency response. The 0 position produces a flat response.

TREBLE

Rotate this knob to increase or decrease the high frequency response. The 0 position produces a flat response.

English

ABALANCE

The balance of the output volume to the left and right speakers can be adjusted to compensate for sound imbalances caused by the speaker location or listening room conditions.

BLOUDNESS

Used to compensate for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume. (Refer to page 12 for details.)

CREC OUT selector

Rotate this knob to select the source for recording to an MD recorder or tape deck. This setting is independent of the INPUT selector setting, so this function allows you to record the selected source while listening to another source.

DFront coverRefer to inside of the front cover on how to open and close the front cover.EINPUT selectorTurn this knob to select the input source.

The selected source will be shown by the lighting of corresponding input source indicator.

FVOLUME

Turn this knob to raise or lower the volume level. (The REC OUT level is not affected.)

E-5