Yamaha CBX-K2 Setting a Specific Value for a Specific Controller, Sending a Single-Byte Data Message, Sending a Simple Command with L

Setting a Specific Value for a SpecificController

Operation: C + ç → Function Key →

Controller Number → L → {Value(s) → L}

Relevant Functions: RPN Direct Data Send*; Controller

Direct Data Send; NRPN Direct Data Send*

Functions marked with an asterisk (*) above require

that you enter two values: an MSB (Most Significant

Byte) and an LSB (Least Significant Byte). (See on

page 21 and operation , page 23.)

●

Example:

Changing the Portamento Time of the tone generator’s voice

to 25.

C + ç → S → 5 (Portamento Time) →

K → {2 → 5 → K}

The operation steps enclosed in braces ({}) can be repeated

or re-entered as long as C is held.

NOTE

■

This operation transmits a value for the

specified controller number WITHOUT altering the

current controller assignment for the Assignable Wheel

or Assignable Slider.

Sending a Single-Byte Data Message

This function allows you to quickly and easily

send a non-standard MIDI message of a single

byte. The effective range of this function is from

0–255; values outside of this range will be

ignored.

Operation: C + ç → {Value → L}

Setting the Functions

Sending a Simple Command with L

Operation: C + ç → Function Key → L

Relevant Function: TG300B Reset

●

Example:

Sending the current CBX-K2 settings to a MIDI storage

device or sequencer with the Bulk Dump Out function

C + ç → ™ → L

Setting a Specific Value for a Function

Operation: C + ç → Function Key → Value →

Relevant Functions: Song Select; Voice Map; Device

Number; Touch Sensitivity; Data Density (Wheel); PB

Density; Data Density (Slider); Measure Number

●

Example:

Changing the touch sensitivity of the CBX-K2 to 10

C + ç → ˙ → 1 → 0 →

●

Example:

Sending a (decimal) value of 252

C + ç → {2 → 5 → 2 → K}

The operation steps enclosed in braces ({}) can be repeated

or re-entered as long as C is held.

NOTE

■

Decimal values of MSB and LSB are 3 digits

each (6 digits total); hexadecimal values are 2 digits

each. Zeroes must be entered, unless they occur at the

beginning of the value. For an example of MSB = 012,

LSB = 034 above, the first zero may be omitted, but the

second must be entered. In other words, the value

could be entered as 1

→

2

→

0

→

3

→

4

→

The operation steps enclosed in braces ({}) can be repeated

or re-entered as long as C is held.

This operation transmits a value for the

specified controller number WITHOUT altering the

current controller assignment for the Assignable Wheel

or Assignable Slider.

This function allows you to quickly and easily

send a non-standard MIDI message of a single

byte. The effective range of this function is from

0–255; values outside of this range will be

ignored.

The operation steps enclosed in braces ({}) can be repeated

or re-entered as long as C is held.

Decimal values of MSB and LSB are 3 digits

each (6 digits total); hexadecimal values are 2 digits

each. Zeroes must be entered, unless they occur at the

beginning of the value. For an example of MSB = 012,

LSB = 034 above, the first zero may be omitted, but the

second must be entered. In other words, the value

could be entered as 1

2

0

3

4

K.