CD SYNCHRONIZED RECORDING
Using a compatible YAMAHA tape deck, you can synchronize the tape deck to start recording automatically when this unit starts playback. With this function, you can record a CD on tape more easily and precisely. (For details, refer to the operation manual of the tape deck to know whether it is compatible or not.)
*This unit and the tape deck must be placed close to each other so that both of them can receive the signals from the remote control transmitter of this unit at the same time.
4If desired, select the track to be recorded first.
1 | 2 | 3 | DISC SKIP |
|
|
| or |
4 | 5 | 6 |
|
7 | 8 | 9 |
|
0 |
|
|
5Press the w button.
3
4
STANDBY/ON
| SYNCHRO DIMMER |
| OPEN/ | ||
|
| CLOSE | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TEXT/ |
| PEAK |
|
|
| TIME |
| |
| TAPE |
| CLEAR |
| PROG |
|
|
|
| ||
| 1 | 2 | 3 | ||
|
|
|
|
|
|
| 4 | 5 | 6 | ||
|
|
|
|
|
|
|
|
|
| ||
| 7 | 8 | 9 | ||
|
|
|
|
|
|
|
|
|
|
| |
| 0 | +10 |
| INDEX | |
|
|
|
|
|
|
|
|
|
|
|
|
MODE | - OUTPUT LEVEL + |
|
| ||
|
|
|
|
| 1 |
|
|
| |||
DISC SCAN | DISC SKIP |
| |||
|
|
|
|
| |
DISC SCAN |
| DISC SKIP | |
|
|
|
|
REPEAT |
|
| RANDOM |
|
|
|
|
5
Both CD playback and tape deck recording start. * CD playback starts a little later than recording.
6If you want to stop recording temporarily and restart recording from a desired track, follow steps 3 to 5 again.
■To cancel this function
Press the a button.
RECORDINGFUNCTIONS
CDC8 WH26170
REPEATRANDOM
1Select a disc.
DISC SKIP
2Load a tape on the tape deck.
*The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (For details, refer to page 22.)
3Press the SYNCHRO button.
SYNCHRO
This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.
* In this mode, the time display on this unit blinks.
Notes
•To finish or stop recording, press the a button on the tape deck.
•Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (For details, refer to pages 13 to 14.)
•This function can also be used together with the tape- programming function. (For details, refer to pages 18 to 21.)
FOR
English
17En
