Yamaha CDC-697 Playxchange, Scanning Discs, on the disc tray, To stop playback temporarily

BASIC OPERATION

3 Select a desired disc play mode (1DISC or				PLAYXCHANGE
5DISCS) confirming it on the display.
			During playback, you can open the disc tray by pressing the
MODE
	5DISCS S F P
			PLAYXCHANGE button on the front panel without
	1DISC	REP RN
	SEARCH TITLE	ARTIS	interrupting disc playback. However, in this case, pressing
Shows the selected disc mode.			the DISC SKIP buttons has no effect. You can load or
			replace discs on the trays when the disc tray is opening,
“1DISC” mode: The unit will play back a
			however, never load a disc on the tray hidden inside the unit.
designated disc only.
			If doing so, the disc and the unit may be damaged, because
“5DISCS” mode: The unit will play back all discs on
			the tray already has a disc, which is being played back.
the tray in sequence.

4Start playback from the first track of the disc 1.

*If necessary, select a desired disc by using the DISC SKIP buttons, or a DISC-select button on the

front panel.

DISC SKIP			DISC
	or	2	3	4
On the remote control		On the front panel
transmitter

Playback will automatically

start.

Scanning Discs

■This mode is convenient to search for a desired disc (or to check discs

on the disc tray)

When the DISC SCAN button is pressed in stop mode, this unit will play back a section of each disc in turn for 8 seconds.

If, during this playback, you find a disc that you want to listen to, press the DISC SCAN button once again or press the w button to cancel this function. The unit will enter into the normal playback mode.

■To stop playback temporarily

	or
On the remote control	On the front panel
transmitter

To resume playback, press the d button again (or press the

wbutton).

*The w/d button on the front panel can also be used to stop playback temporarily or to resume playback.

DISC SCAN

Notes

•During this playback, the disc tray numbers blink in the display. Every time the playback of a disc is finished, the corresponding tray number is changed from flashing to lighting.

•If the disc being played back has a long blank space between tracks, you will hear no sound during disc scan.

■To stop playback completely

	or
On the remote control	On the front panel
transmitter

10En