AMX nxc manual NXC-COM2 Dual COM Port Control Card, NXC-COM2 Specifications, Deviceid

NXC-COM2 Dual COM Port Control Card

NXC-COM2 Dual COM Port Control Card

The NXC-COM2 Dual COM Port Control Card (FG2022) provides two RS-232, RS-422, or RS-485 control ports and LED feedback for remote sources connected to the NetLinx CardFrame, NI-4000 or NetModule. FIG. 3 shows the COM2 card.

ICSNET Status LED

LED 1

LED 4

FIG. 3 NXC-COM2 Dual COM Port Control card

Specifications

NXC-COM2 Specifications

Power Requirements:	140 mA @ 12 VDC
Operation:	Data 1-2: Two RS-232/422/485 control ports, supports XON/XOFF, CTS/RTS,
	300-230,400 baud
Status LEDs (2 per channel):	• Red LED shows TX (transmit) data activity
	• Yellow LED shows RX (receive) data activity
	- LED 1: CH1 TX (red)
	- LED 2: CH1 RX (yellow)
	- LED 3: CH2 TX (red)
	- LED 4: CH2 RX (yellow)
	• Green ICSP status LED (located on the board):
	- On = card is not in communication with the Master.
	- Blinks (1-second intervals) during normal operation.
Connections/wiring:	Two 10-pin 3.5 mm captive-screw terminals
DEVICE_ID:	$0107

NetLinx Cardframe, Control Cards, and NetModules - Operation Reference Guide 5