All Track Erase

1Load a CD-RW disc that has been recorded on.

•This function is not possible on a finalized CD-RW disc.

2Press ERASE until “Erase ALL?” appears on the display.

•If you want to cancel the Erase mode, press & (STOP &on the remote).

3Press ^(PLAY #on the remote) to start the All Track Erase process.

•This process requires from several seconds up to 3 minutes depending on the amount of recorded material.

•During All Track Erase, “Erase” and the remaining time to completion appear in the display.

4The recorder stops when All Track Erase is complete.

TOC Erase

1Load a CD-RW disc that has been finalized.

2Press ERASE.

•“Erase TOC?” appears in the display.

•If you want to cancel the Erase mode, press & (STOP &on the remote).

3Press ^(PLAY #on the remote) to start the TOC Erase process.

•This process requires approximately 1 minute to complete.

•During TOC Erase, “Erase” and the remaining time to completion appear in the display.

4The recorder stops when TOC Erase is completed.

Note

• When TOC Erase is complete, the TOC indicator goes out.

Disc Erase

1Load a CD-RW disc that has been recorded on.

•The CD-RW disc may be finalized or not.

2Press and hold ERASE for about 2 seconds.

•“Erase DISC?” appears in the display.

•If you want to cancel the Erase mode, press & (STOP &on the remote).

3Press ^(PLAY #on the remote) to start the Disc Erase process.

•This process requires approximately one-fourth the total time on the disc.

4The recorder stops when Disc Erase is completed.

RECORDING FUNCTIONS

English

E-22