PRECAUTIONS: READ THIS BEFORE OPERATING THE UNIT

CAUTIONS

To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

Install your unit in a well ventilated, cool, dry, clean place – away from windows, heat sources, vibration, dust, moisture, or cold. To avoid humming sounds, locate the unit away from other electrical appliances, motors, and transformers. To prevent fire or electrical shock, do not expose to rain and water.

Do not operate the unit upside-down. It may overheat, possibly causing damage.Never open the cabinet. If something drops into the set, contact your dealer.Do not use force on switches, knobs or cords.

When not planning to use this unit for long periods of time (i.e., vacation, etc.), disconnect the AC power plug from the wall outlet.

Grounding or polarization – Precautions should be taken so that the grounding or polarization of the unit is not defeated.

Do not clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

Be sure to read the “Troubleshooting” section on common operating errors before concluding that your unit is faulty.

Do not place another component on top of this unit, as damage or discoloration on the surface of the unit may result.

To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.

When disconnecting the power cord from the walloutlet, grasp the plug; do not pull the cord.

Do not plug the AC power plug to the wall outlet before you finish all connections.

The voltage to be used must be the same as that specified on this unit. Using this unit with a higher voltage than that which is specified is dangerous and may result in a fire or other type of accident causing damage. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.

Sudden temperature changes and storage or operation in an extremely humid environment may cause condensation inside the cabinet.

When this unit is shipped, there is a protective pad in the disc tray. For correct operation of this unit, remove before use.

CAUTION FOR MOVING THE UNIT

Before moving the unit, first check that there is no disc in the disc tray. To prevent malfunction of this unit, be sure to insert the transportation pad in the disc tray as described on page 4. Finally, press POWER to turn the unit off, and disconnect the AC power plug from the wall outlet.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.
English

E-2