CLP-295GP Owner’s Manual 43
Basic Operation
Recording Your Performance
Changing a voice or tempo after recording
You can change the voice and tempo after recording to change a song’s feel or to set a more suitable tempo.
You can also change these elements in the middle of a song.
Procedure
Before changing a voice or
tempo, set the starting method
to “Normal.” (page 39)
When the starting method is set
to “FirstKeyOn,” you cannot
change a voice or tempo.
Refer to “Questions about
Operations and Functions” on
page 101 for information on the
settings that can be changed
here.
Change the tempo in Step 4.
The panel settings on Step 3
will be saved in memory and
you will not be able to restore
the previous settings. Proceed
with caution.
1. Select a song you wish to change (page 42).
2. To change the voice or tempo in the middle of the
song, specify the measure to change by using the
B [–][+] buttons while the playback screen is displayed
or by pressing the [PLAY/PAUSE] button to locate a
point slightly prior to the beginning of the part you
wish to re-record.
3. Change the settings (voice, reverb, etc.).
For example, if you wish to change the recorded E.Piano1 voice to
E. Piano2, use the voice group buttons and the A [–][+] buttons to
select E.Piano2.
When the setting is complete, press the [SONG SELECT] button once
to return to the song select screen.
4. Press and hold down the [REC] button and select the
part to change.
The indicator for the selected part lights up in red.
Change the tempo setting now, if necessary.
At this point, do not play the keyboard or press the [PLAY/PAUSE]
button. Otherwise, recording will start, erasing the recorded data.
5. Press the [STOP] or [REC] button to exit record mode.
When you exit record mode, the display prompts you whether you
want to overwrite the song or not. Press the B [+ (YES)] button to
overwrite the song.
TIP
TIP
TIP
CAUTION