Yamaha CLP-295GP Setting the reverb type [ReverbType], Setting the reverb depth [ReverbSend]*, Selecting the chorus type [Chorus Type], Setting the chorus depth [ChorusSend]*

CLP-295GP Owner’s Manual 79
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
You cannot set this parameter for the voice parts “Left” and
“LeftXLayer.”
See the procedure on page 71.
Setting range:
Room Simulates reverberation in a room.
Hall1 Simulates reverberation in a concert hall.
Hall2 Reverberation is slightly longer than that of
“Hall1.”
Stage Reverberation suitable for a solo instrument
sound.
Plate Reverberation from the vibration of a metal
plate.
The reverb effect is not applied if the ReverbSend parameter is
set to “0.”
See the procedure on page 71.
In Dual mode:
Setting range:
0 - 127
You cannot set this parameter for the voice parts “Left” and
“Left × Layer.”
See the procedure on page 71.
Setting range:
Chorus Adds a rich, spacious sound.
Celeste Adds swell and a spacious sound.
Flanger Adds swell effects of an ascending or
descending jet plane.
See the procedure on page 71.
In Dual mode:
Setting range:
0 - 127
Setting the reverb type
[ReverbType]
Setting the reverb depth
[ReverbSend]*
TIP
B
D
NO YES
A
C
Main Set?-->
ReverbType Hall1
TIP
B
D
NO YES
A
C
Main Set?-->
ReverbSend 14
B
D
NO YES
A
C
MainxLayer Set?-->
ReverbSend(E.Piano1) 26
Voice for editing (Voice 1 or Voice 2)
Selecting the chorus type
[Chorus Type]
Setting the chorus depth
[ChorusSend]*
TIP
B
D
NO YES
A
C
Main Set?-->
ChorusType Chorus
B
D
NO YES
A
C
Main Set?-->
ChorusSend 48
B
D
NO YES
A
C
MainxLayer Set?-->
ChorusSend(E.Piano1) 72
Voice for editing (Voice 1 or Voice 2)