CLP-295GP Owner’s Manual 81
Detailed Settings
Detailed settings for the voices [VOICE SETTING]

This will be displayed only if Rotary is selected for the

DSP Type parameter explained above.

It sets the rotation speed of the rotary speaker effect.

See the procedure on page 71.
Setting range:

Slow/Fast

This sets the depth of the DSP effect (page 80).

Some DSP Type settings do not allow you to set the

DSPDepth.

See the procedure on page 71.
Setting range:

1 (output only the original sound with almost no effect

applied) - 127 (output only the sound processed by the

effect)

See the procedure on page 71.
Setting range:

–64 - +63

See the procedure on page 71.
Setting range:

–64 - +63

Resonance can produce a distinctive “peaky” tone, making the
sound brighter and harder.
Equalizer:
An audio equalizer divides the frequency spectrum into multi-
ple regions and enables the user to adjust the relative ampli-
tude of each region.
See the procedure on page 71.
Setting range:

32 Hz - 2.0 kHz

Setting the rotation speed of the rotary speaker* [RotarySpeed (Rot.Speed)]Adjusting the depth of the DSP effect* [DSPDepth]Adjusting the brightness of the sound* [Brightness]
B
D
NO YES
A
C
Main Set?-->
RotarySpeed Slow
B
D
NO YES
A
C
Main Set?-->
DSPDepth 127
B
D
NO YES
A
C
Main Set?-->
Brightness 0
Adjusting the resonance effect* [HarmonicContent (Harmonic)]Adjusting the low-range frequency of the equalizer* [EQ LowFreq. (EQ L.Freq)]
B
D
NO YES
A
C
Main Set?-->
HarmonicContent 0
TIP
TERMINOLOGY
Low Gain High GainLow Freq. High Freq.
B
D
NO YES
A
C
Main Set?-->
EQ LowFreq. 32