Yamaha CP5, CP50 EQ Low EQ High

Internal Design of the CP5 & CP50

Reference

Left & Right Parts

[VOICE]

[PRE-AMP]

[MOD-FX]

[PWR-AMP] (CP5 only)

[LEFT1]/[LEFT2]/[RIGHT1]/

[RIGHT2] (CP5)

[LEFT]/[RIGHT] (CP50)

[COMMON]

Song Setting Area

[SONG SETTING]

[RECORD]

TRACK Part

[TRACK]

MIC INPUT Part

[MIC INPUT] (CP5 only)

Settings for All Parts

[REVERB]

Settings for All Performances

[MASTER COMPRESSOR]

[UTILITY]

[FILE]

Appendix

47 CP5/CP50 Reference Manual

9Shape This parameter is used to specify whether shelving or peaking equalization is to be

applied within the two end bands — namely, Low and High. It is available only when

MEQ has been set to “Low” or “High”.

Setting values: shelv (Shelving EQ), peak (Peaking EQ)

shelv

Signals at all frequencies either above (“High”) or below (“Low”) the specified frequency

will be uniformly boosted or cut.

peak

Signals within a band of frequencies around the specified frequency will be boosted or cut

in a localized fashion.

Gain This parameter is used to specify how much signal levels in the vicinity of the fre-

quency set using the Freq parameter will be boosted or cut. Gain levels for the indi-

vidual frequency bands can also be set using the [MASTER EQUALIZER] knobs on

the control panel.

Setting values: -12dB to +12dB

0 (10) Freq (Frequency) This parameter is used to set the central frequency around which levels will be c ut or

boosted.

Setting values:

Low

When Shape is set to “shelv”: 32Hz to 2.0kHz

When Shape is set to “peak”: 63Hz to 2.0kHz

LowMid, Mid, and HighMid

100Hz to 10.0kHz

High

500Hz to 16.0kHz

Q (Resonance) This parameter is used to create a range of different frequency-curve characteristics

in the vicinity of the frequency set using the Freq parameter. If you set a large value,

a narrower band of frequencies will be boosted or cut, and the tone will change

markedly around the center frequency. If you set a smaller value, a wider band of fre-

quencies will be boosted or cut, and the tone will change more gradually around the

center frequency.

Setting values: 0.1 to 12.0

NOTE The Q parameter is unavailable for the Low and High bands when their respective

Shape parameters have been set to “shelv”.

Page On-screen name

(and full name) Description

–

+

0

–

+

0

EQ Low EQ High

Frequency

Frequency

Gain

Frequency

Frequency

Gain

–

+

0

Frequency

Frequency

Gain

–

+

0

0.1

12.0

Frequency

Frequency

Contents

Main Reference Manual Contents Internal Design of the CP5 & CP50 3 Reference 12 Appendix 54 Reference Guides Owners Manual (hardcopy booklet) Reference Manual (this pdf document) Data List (pdf document) Using this Reference Manual Internal Design of the CP5 & CP50 Principal Components CP5/CP50 Tone Generator CP5 Parts CP50 Parts Performance Left & Right Parts Layered parts Split parts Parts Roles of Blocks & Common Settings Area Voi ce Bl ock Pre-Amplifier Block Modulation Effect Block Power-Amplifier / Compressor Block (CP5 only) TRACK Part MIC INPUT Part (CP5 only) Reverb Block Makeup of Performance Memories Preset Performance Memory External Performance Memory Preset Performance Memory User Performance Memory External Performance Memory 9 CP5/CP50 Reference Manual HINT Using External Performance Memories Song Setting Area Recording MIDI & Audio Data Playing MIDI & Audio Data Controller 12 CP5/CP50 Reference Manual Reference This section provides a detailed description of the parameters used to configure your CP5 or CP50. Left & Right Parts Voice Block The Voice block is used to set a basic sound for the currently selected part. Pre-Amplifier Block Configuring Pre-Amplifier Block Parameters On-screen name (and full name) Associated voices Description NOTE Voic e na me Description NOTE NOTE On-screen name (and full name) Associated voices Description 15 CP5/CP50 Reference Manual Modulation Effect Block For PIANO and E.PIANO voices: Selecting Modulation Effect Block Types On-screen name Selected modulation effect 16 CP5/CP50 Reference Manual Effect category Effect name On-screen name Effect category: Delay (DLY) Effect category: Chorus (CHO) Effect category: Distortion (DST) Effect category: Compressor (CMP) Effect category: Lo-fi (L-F) Effect category: Tech (TEC) Effect category: Misc (MSC) Configuring Modulation Effect Block Parameters NOTE On-screen name (and full name) Associated effects Description Effect category Effect name Parameters for Other effects On-screen name On-screen name (and full name) Associated effects Description Page Page Page Page Page Power-Amplifier / Compressor Block (CP5 only) Selecting Power-Amplifier / Compressor Block Types For PIANO and E.PIANO voices: For non-piano voices: Configuring Power-Amplifier / Compressor Block Parameters Power-Amplifier & Compressor Parameters 27 CP5/CP50 Reference Manual Other Settings for Left & Right Page NOTE Page On-screen name NOTE Page On-screen name 31 CP5/CP50 Reference Manual Common Settings Area Setting Performance Names & Playing Modes (Pages 1 and 2) Page On-screen name Description 32 CP5/CP50 Reference Manual Zone Edit Screen CP50 zones: (and full name) Description 34 CP5/CP50 Reference Manual Setting Controllers (Pages 3 to 5) Page On-screen name (and full name) Description CP50: NOTE CP50: Song Setting Area Song Setting Screen NOTE CAUTION (and full name) Description 37 CP5/CP50 Reference Manual Record Screen (and full name) Description Name screen NOTE NOTE (and full name) Description 39 CP5/CP50 Reference Manual TRACK Part (and full name) Description 40 CP5/CP50 Reference Manual MIC INPUT Part (CP5 only) Edit Sequence Mic Effects Screen Page On-screen name (and full name) Description Page On-screen name Mic Insert Effect Screen Edit Sequence 42 CP5/CP50 Reference Manual Settings for All Parts Reverb Blo ck 43 CP5/CP50 Reference Manual Settings for All Performances Master Compressor Block 44 CP5/CP50 Reference Manual Utility Area Page On-screen name (and full name) Description NOTE Page On-screen name (and full name) Description Page NOTE Page On-screen name (and full name) Description EQ Low EQ High NOTE Page On-screen name (and full name) Description 49 CP5/CP50 Reference Manual File Area Internal Design of the CP5 & CP50 50 CP5/CP50 Reference Manual Save The parameters to be set on the Save screen are as follows. If Typ e has been set to All: If Typ e has been set to Ext: On-screen name (and full name) Load On-screen name NOTE (and full name) Description On-screen name (and full name) Description If Typ e has been set to Perf: On-screen name On-screen name (and full name) Description 53 CP5/CP50 Reference Manual If Typ e has been set to SMF: Rename The parameters to be set on the Rename screen are as follows. Delete On-screen name On-screen name (and full name) Description Appendix MIDI MIDI Channels Supported MIDI Message Types Channel Messages Page Channel Mode Messages System Messages