Setup Procedures
7Connect the series A plug of the included USB cable to the USB port of the interface card.
USB port
USB cable (included)
Series A plug
Notes
•Be sure to connect the drive to the USB port of the interface card. If you connect the drive to the computer via a hub, the drive may not operate properly.
•When the CRW2200UX drive is connected to a USB
STEP 2 Install the Device Drivers
As soon as the CRW2200UX drive is connected to the computer, installing of the device drivers starts automatically.
Device drivers are only installed the first time the drive is connected to the computer.
For Windows 98 Second EditionInstall the included device drivers.
For details, refer to the separate manual, “Device Driver Installation Guide”, that came with the CRW2200UX drive.
For Windows Me/2000 ProfessionalWindows Me/2000 Professional standard device drivers are installed automatically.
Note
The device drivers are installed for each USB port. After connecting the drive to a port, if you connect the drive to another port, the screen
15