Yamaha CRW2200UX Operation, Loading/Ejecting a Disc

Operation

Loading/Ejecting a Disc

You can load and eject a disc (as described below) only when the CRW2200UX drive is turned on.

1Open the disc tray by pressing the eject button on the CRW2200UX drive’s front panel.

2Place the disc onto the disc tray with its label or printing facing upward, or remove the disc from the disc tray.

3Close the disc tray by pressing the eject button again. You can also gently push it closed.

Load or unload the disc after the disc tray has fully opened. Do not push or pull the disc tray using excessive force. Doing so can damage the drive or the disc.

Note

The disc tray does not open while a disc is being read or written.

Contents

Page Page Page English SAFETY PRECAUTIONS WARNING CAUTION ■About handling CD-R/RWdiscs ■Precautions for Transportation ■Copyrights ■WARRANTY Table of Contents Introduction Features of the CRW2200UX Drive High speed writing/reading USB 2.0 compatible SafeBurn™ (Enhanced write stability technology) High-fidelitydigital audio CD TEXT support Buffer Underrun Defined Yamaha Buffer Underrun Protection CRW2200 Before Use System Requirements Computer Operating System (OS) CD Writing Software Hard Drive Space Supported Discs About CD-ROMs About Partial CAV (Constant Angular Velocity) Serial Number Front and Rear of Unit Front Panel Rear Panel Setup Procedures Setup Flowchart STEP 1 Set Up the CRW2200UX Drive Connect the included AC adapter to the Connect the included power cable to the AC adapter 6Turn on the CRW2200UX drive STEP 2 Install the Device Drivers STEP 3 Configuring for the Operating System STEP 4 Install the CD Writing Software Operation Loading/Ejecting a Disc Ejecting a Disc in an Emergency Disconnecting the CRW2200UX Drive Troubleshooting The disc tray does not open The disc is ejected against your will (or it comes out spontaneously) No data can be read from a disc The playback of an audio CD (CD-DA)cannot be heard 1 The “Properties” setting of the CRW2200UX drive ➀ Select Control Panel, System, Device Manager tab, YAMAHA CRW2200E Properties, and open the Properties tab 2The setting of the Windows Media Player The error message “Buffer Underrun” is displayed Unstable operation Other problems Appendix Recording Methods Disc-at-Once(DAO) Track-at-Once(TAO) Session-at-Once(SAO) Packet Writing About the Firmware Checking the Firmware Version of the CRW2200UX Drive LED Indicator Messages CRW2200UX Specifications Page AC adapter The CRW2200UX series complies with the following specifications Index Page EUROPE, EASTERN EUROPE and RUSSIA U.S.A CANADA AUSTRALIA