Troubleshooting
The error message “Buffer Underrun” is displayed.●If your CD writing software supports the Buffer Underrun Protection, you must activate the Buffer Underrun Protection. For more details, refer to the documentation that came with your CD writing software.
●To prevent the occurrence of a buffer underrun and to increase the efficiency of data writing, try the following:
•Reduce the data writing speed.
•Create an image file on the hard drive.
•Optimize the hard drive. (Defragmentation)
•Do not start any application software (including screen savers) during data writing.
•Deactivate the power management for the hard drive.
•Select “Sync data transfer” for the data transfer mode if a SCSI hard drive, a SCSI
•Deactivate the Windows Active Desktop.
•Exit all
•Check your CD writing software against the documentation that came with it to be sure that there is no problem with it.
Notes
•When the CRW2200UX drive is connected to a USB
•A writing error could occur if vibration is applied to the drive while data is being written on the
●Aren’t two or more CD writing software programs installed on your computer? Installing two or more CD writing software programs on a computer sometimes makes its operation unstable.
●Isn’t the disc dusty or dirty?
Remove dust or dirt from the disc, using an air spray or by wiping with a dry, soft cloth. To avoid damage, always wipe the disc gentry in directions perpendicular to the edge of the disc.
Other problems●Your CD writing software does not recognize the CRW2200UX drive.
In order for CD writing software to recognize your drive, it must support the CRW2200UX drive. Contact the manufacturer of your CD writing software to see whether the software supports the CRW2200UX drive.
25