Yamaha CRW8424E Setup Flowchart, Set up the CRW8424E drive, Start using the CRW8424E drive, Install the CD writing software, STEP, STEP, STEP, Set the jumper switches (P.14)

This flowchart shows the procedure for setting up the CRW8424E drive. For easy cross-referencing, the relevant pages in this manual are also given.

STEP	Set up the CRW8424E drive
1	1.	Remove the outer casing of computer. (P.10)
	2.	Set the jumper switches (P.14)
	3.	Fit the drive into the computer (P.15)

STEP

Check that the CRW8424E drive is recognized correctly

Go to Control Panel System Device Manager tab. Double-click on CDROM to check that the drive is recognized correctly by the computer’s OS. (P.23)

STEP

STEP

For details about how to install the software, refer to the documentation that came with it.

Use the drive to create audio CDs, to back up data on your hard disk, or for whatever purpose suits your needs.