* This is a screen shown in the Windows 98 environment.

Installation

^When using Windows 95/98/98SE, after the computer’s operating system has loaded, open the “Control Panel” and

double-click on the “System” icon. Select the “Device Manager” tab and double-click on “CD-ROM”. If the drive has been correctly installed, it should be listed as shown in the figure on the right.

When using Windows NT, you can verify by opening the “Control Panel”, double-clicking on “SCSI Adapter” and clicking the “Devices”

tab.* This is a screen shown in the Windows 98 environment.

For more information on using the operating

system, refer to the documentation that came with the operating system.

If there is an or mark etc. next to the icon for the CRW8424E drive, this means that it has not been installed correctly.

&When using Windows 95/98/98SE, follow Step ^ to open the “Device Manager” window, then double-click the “YAMAHA CRW8424E” icon to open the “YAMAHA CRW8424E Properties” window, and click the “Settings”

tab to select it. A screen similar to the one on the right

appears. Make sure that the “Sync data transfer” check box is not checked. (There is no need to set the “Sync data transfer” check box if it does not appear.) Make sure that the “DMA” check box is checked. If it is not checked, left-click the box to select it. (If the

“DMA” check box does not appear, there is no need to set it since “DMA” is internally selected.)

When using Windows NT, you can verify by opening the “Control Panel”, double- clicking on “SCSI Adapter” and clicking the “Devices” tab. Then right-click on “YAMAHA CRW8424E” and select Properties. You do not need to set the “Sync data transfer” parameter, since it will not appear. If the “DMA” parameter appears, check the “DMA” check box.

*Install the CD writing software.

Refer to the documentation that came with the CD writing software for further details.

23