Operation

The disc tray will not open if the computer is not switched on. With the CRW8424E powered on, pressing the Eject button will not open the disc tray if ATAPI commands prohibit ejecting a disc, such as during reading data.

Remove the disc only after the disc tray has opened fully. Otherwise, you risk damaging the drive or the disc.

Ejecting a Disc in an Emergency

If the disc tray fails to open for some reason, such as a power outage, you can open it manually.

Manual Eject hole

Paper Clip

You should attempt to eject a disc manually only as a last resort. Malfunctions may occur if you do this too frequently.

1Power down the computer.

2Find a pin-like tool with a diameter of 2mm or less to fit through the

Manual Eject hole on the drive’s front panel.

A straightened paper clip is ideal for this purpose.

3Push the tool gently into the Manual Eject hole until the spring-loaded mechanism ejects the tray and disc.

25