Installation

Connecting the CRW8424E Drive

The following steps explain how to install the CRW8424E as a secondary master on the tower computer for expansion or replacement.

1Power down your computer and unplug it from the AC outlet.

If you proceed without doing this, you run the risk of receiving an electric shock and/or short-circuiting and damaging components, including the CRW8424E drive.

2 Remove the outer casing of the computer. If you need to remove screws in the process, make sure you don’t lose them.

The method for removing the casing and fitting the drive in the drive bay can vary depending on the manufacturer. Refer to the documentation that came with your computer for further details.

3Touch a metal part of the computer’s Drain any static charge chassis or power supply unit to drain

any static charge that may have built up inside your body. Alternatively, you can wear an anti-static grounding (earthing) wrist strap.

You can permanently damage equipment if you touch it while there is any static charge in your body.

10