Recording Your Performances and Creating Songs — Song Creator
103
CVP-210/208

Recording Melodies — Step Record (Note)

In this section, we’ll show you how to use Step Recording
by guiding you through this actual music example,
shown at right.
The operations here apply to step 6 on page 102.

■Play back the newly created melody

Use the [C] ( ) button to move the cursor to the beginning of the song, and press the SONG [START/STOP] button
to hear the newly entered notes. To actually enter the recorded data, press the [EXIT] button. The entered data can be
edited from the SONG CREATOR (1 - 16) display (page 110).
1
1-1 Select this note. 1-3 ...press this (to input a tie).
1-2 While holding down this note...
22-2
2-3
2-1 Select this note.
44-1 Press this button to
display the dotted notes.
4-2 Select this note.
4-3
55-1 Call up the normal notes
by pressing this button.
5-3
5-2 Select this note.
The notation display on the instrument may not be accu-
rate, especially for tied notes or longer notes. To have the
notation displayed accurately, set the gate time to tenuto
by using the [H] button, and input the notes as desired.
3
Select this note.
Selecting a note enters a rest of
the equivalent value. For example,
selecting an eighth note () here
results in a eighth note rest ().
▲