Editing the voice — Sound Creator
95
CVP-210/208
EFFECT/EQ
The explanations here apply to step #3 on page 91.
HARMONY
The explanations here apply to step #3 on page 91.

The parameters are the same as for HARMONY/ECHO display of FUNCTION. For details, see page 147.

Determines the effect type (Reverb/
Chorus/DSP).
When a regular voice is selected, the
DSP type and Variation are set in two
separate menus. For information on the
effect structure, see page 129; for a list
of available effect types, refer to the
separate Data List.
Determines the brilliance of the tone,
when a Natural voice is selected. This
can also be set from the PIANO page
(page 93), when a piano voice is
selected.
• Metallic.........Shar p metallic tone
• Bright............Bright tone
• Normal..........Standard tone
• Mellow...........Soft and mellow tone
• Dark...............Dark tone
The same as the “Mixing Console”
on page 126.
• If you select [Bright] or
[Metallic] as the type of
brilliance, the volume level
will increase slightly. In
this case, raising the
[MASTER VOLUME] may
result in distortion. If this
happens, lower the vol-
ume accordingly.
• “SPEED” parameter is
added when selecting
VIBE ROTOR DSP type.
This parameter enables
you to set the speed of
vibrato when you select
the Vibraphone voice, rec-
reating the effect of a vibe
rotor pedal.
This parameter enables you to select whether the
sound is sustained while you press the keys on
the keyboard (“PIANO LIKE”), or the sound is
sustained only while you press and hold down the
sustain pedal, like playing a real vibraphone
(“NORMAL”) (for Vibraphone voice).

NATURAL VOICE

The same as the “Mixing Console”
on page 126.

REGULAR VOICE

Determines the Frequency
and Gain of the Low and
High EQ bands.