Adjust the Volume Balance and Changing Voices
— Mixing Console
129
CVP-210/208
Effect Structure

The CVP-210/208 features the following digital effect systems, which can be applied independently for the Natural

voices (page 92) and the Regular voices (page 92). The effect type, depth, and various parameters can be set with the

panel controls.

About the Effect Connections — System and Insertion

All the effect blocks are connected or routed in one of two ways: System or Insertion. System applies the selected effect

to all parts, while Insertion applies the selected effect to one specific part. Reverb, Chorus and DSP 2 are System effects,

and DSP 3 - 7 (CVP-210)/DSP 3 - 5 (CVP-208) are Insertion effects. The DSP 1 effect, on the other hand, can be

configured for either System or Insertion routing.

The illustration below shows how the various effect blocks are set up and traces the signal flow for the send/return

controls set on the CVP-210/208.

For Regular Voices (CVP-210)

OUT
Rev Send
MAIN VOICE
Dry
Cho Send
Unused DSP blocks are automatically
assigned to the active parts.
Rev Send
LAYER VOICE
Dry
Cho Send
Rev Send
LEFT VOICE
Dry
Cho Send
CHORUS1 Master EQ
REVERB1
DRY LINE
Rev Send
MIC
Dry
Cho Send
Rev Send
STYLE
(each channel)
Dry
Cho Send
DSP Send DSP1
DSP1
MIC. Effect
Vocal
Harmony
When DSP is set as an Insertion effect
(here PART is set to one of the
STYLE channels), it is put here
in the signal flow.
Noise
Gate
3 Band
EQ
Compressor
DSP3
DSP4
DSP5
Rev Send
SONG
(each channel)
Dry
Cho Send
DSP6
DSP7
When DSP is set as a System effect,
it is put here in the signal flow.