Control function operation

TY” indicator light blinks two or three times, then comes on. This indicates the unlock mode is selected.

1

L-Mode

2

 

1“L-Mode” (unlock) button

2“SECURITY” indicator light

EJU31152

Engine stop switch “ ”

The engine stop switch (red button) stops the engine when the switch is pushed.

1

1Engine stop switch

EJU31163

Engine shut-off switch “ ”

The engine shut-off switch automatically stops the engine when the clip, on the end of the engine shut-off cord (lanyard), is removed from the switch, such as if the operator falls off the watercraft.

Insert the clip under the engine shut-off switch before starting the engine.

1 2

3

1Engine shut-off switch

2Clip

3Engine shut-off cord (lanyard)

When the engine is not running, remove the clip from the engine shut-off switch to prevent accidental starting or unauthorized operation by children or others.

EJU41650

Start switch “ ”

ECJ01310

NOTICE

Do not run the engine over 4000 r/min on land. Also, do not run the engine for more than 15 seconds without supplying water, otherwise the engine could overheat.

The start switch (green button) starts the engine when the switch is pushed.

Release the start switch as soon as the engine starts to run. If the engine does not start

33