Instrument operation

EJU31458

Multifunction information

center

The multifunction information center displays various watercraft information.

1 2

3

4 5

onds after the engine stops, the center will turn off and enter a standby state. When the engine is started again, the displays return to their state before the center turned off, and then the center starts to operate normally.

EJU35024

Information display

The information display shows watercraft operating conditions.

1

2

3

4

1“SECURITY” indicator light (VX Deluxe / VX Cruiser)

2Select button

3Information display

4“L-MODE” indicator light (VX Deluxe / VX Cruiser)

5“WARNING” indicator light

Multifunction information center initial operation

When the multifunction information center is activated, all of the display segments come on. After 2 seconds, the warning indicators in the information display go off, and then the center starts to operate normally.

If only the multifunction information center is activated, the “WARNING” indicator light blinks once.

TIP:

VX Deluxe / VX Cruiser: The “SECURITY” indicator light also comes on as part of the initial operation.

The “SECURITY” indicator light will go off when the engine is started.

Multifunction information center standby state

If the multifunction information center does not receive any operation input within 25 sec-

5 6 7 8

1Tachometer

2Speedometer

3Hour meter/voltmeter

4Fuel level meter

5Check engine warning indicator

6Engine overheat warning indicator

7Oil pressure warning indicator

8Fuel level warning indicator

EJU31503

Speedometer

The speedometer shows the watercraft speed against water.

By switching the display units, the speed can be shown in kilometers per hour “km/h” or miles per hour “mph”.

40