Manuals / Brands / Musical Instruments & Equipment / Musical Instrument / Yamaha / Musical Instruments & Equipment / Musical Instrument

Yamaha DME4io-ES, DME8i-ES, DME8o-ES Control from a computer in the same subnet group, Device Group

1 48

Download 48 pages, 2.73 Mb

References

Other Functions Connecting to an

External Device

Audio I/O

Connection

Connecting to

a Computer

Controls and

Connectors

Introduction to

the DME Satellite

Foreword

Connecting to a Computer

DME8i-ES/DME8o-ES/DME4io-ES Owner’s Manual 21

Control from a computer in the same subnet group

NOTE

• The IP addresses in the diagram are examples.

•Use a switching hub that is compatible with 100Base-TX/10Base-T network speeds.

The maximum length of a cable between a switching hub and the DME Satellite is 100 meters. Due to the quality of cables

and switching hub performance, however, proper operation at the maximum length cannot be guaranteed in some cases.

Use a STP (Shielded Twisted Pair) cable to prevent electromagnetic interference.

•If you are using multiple DME series units, set Link Mode on each unit to the same setting. Yamaha recommends that you

select 100Base-TX for the Link Mode setting.

•You can also connect a supported controller such as the AMX or Crestron, and control the DME Satellite remotely. For

details, refer to “Connecting to an External Device” on page 26.

HOMEHOME UTILITYUTILITYSCENESCENE LEVELLEVEL MUTEMUTE ENTERENTERCANCELCANCEL

Device Group

Group Master

DME Satellite (IP address: 192.168.0.7)

Ethernet Cable

Switching Hub

Ethernet Straight Cable

Computer

(IP address:

192.168.0.100)

Ethernet Cable Ethernet

Straight Cable

DME Satellite

(IP address: 192.168.0.3)

(Master ID: 7)

DME64N/24N

(IP address: 192.168.0.250)

(Master ID: 7)

Contents

Main Explanation of Graphical Symbols IMPORTANT SAFETY INSTRUCTIONS CAUTION 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! FCC INFORMATION (U.S.A.) Connecting the Plug and Cord IMPORTANT NOTICE FOR THE UNITED KINGDOM COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) PRECAUTIONS 1/2 Do not open PLEASE READ CAREFULLY BEFORE PROCEEDING CAUTION 2/2 Backup battery Connections Handling caution Foreword .......................................... 7 References....................................... 32 Other Functions.................................. 31 Contents Turning the power on and off 2. Foreword Differences between DME8i-ES, DME8o-ES, and DME4io-ES 5. 4. Introduction to the DME Satellite Audio System Network User Dened buttons (User Dened parameters) Conguration Components and parameters Scene Scene change Scene structure Signal Types Control signals between devices outside the device group Control signals within a device group Audio System Examples Multiple DME Satellite units: Large-scale system Space D Space B Space A Space C About DME Designer Front Panel Controls and Connectors Page Rear Panel Precautions for Using a Rack-mounted DME Satellite USB Connection Connecting to a Computer Network Settings Setting the IP address Master and slave setting Ethernet Connection ([NETWORK] Connector) Control from a computer in the same subnet group Device Group Control from a computer with a different subnet Device Group Connecting multiple device groups Device Group 1 Device Group 2 Digital Audio Connection (EtherSound Connectors) Audio I/O Connection Analog Audio Connection ([INPUT] & [OUTPUT] Connectors) Cable preparation Euroblock plug connection 1. 2. 3. Connecting to an External Device Controlling a DME Satellites internal head amps from a digital mixer Controlling the DME Satellite from an external device EtherSound Connection (EtherSound Connectors) Controlling DME Satellites internal head amps from a digital mixer Network Connection ([NETWORK] Connectors) GPI Connection ([GPI] Connector) Initializing the DME Satellite 1. 2. Other Functions Options ICP1 CP4SW, CP4SF, and CP1SF References Troubleshooting Component Refer to the DME Designer Owners Manual for more information on each component. MIDI Data Format 1. MIDI functions on the DME8i-ES, DME8o-ES, and DME4io-ES 2. MIDI Data Flow 3. MIDI Setup 4. MIDI Format Page MIDI Implementation Chart Foreword Introduction to References Connecting to an Display Messages Warning Messages Error Messages Indicator Error Action Indicator Error Action General Specifications Electrical Characteristics Page Page Input/Output Characteristics [NETWORK] Connector (100Base-TX Ethernet, RJ-45) Dimensions Index A C D E MEMO CANADA U.S.A. MEXICO BRAZIL NORTH AMERICA CENTRAL & SOUTH AMERICA EUROPE AFRICA MIDDLE EAST ASIA OCEANIA