Yamaha DME4io-ES, DME8i-ES, DME8o-ES EtherSound Connection (EtherSound Connectors)

Connecting to an External Device

DME8i-ES/DME8o-ES/DME4io-ES Owner’s Manual

Foreword

Introduction to

the DME Satellite

Controls and

Connectors

Connecting to

a Computer

Audio I/O

Connection

Connecting to an

External Device Other Functions

References

28

EtherSound Connection (EtherSound Connectors)

You can use the EtherSound connector to control the DME Satellite’s internal head amp or other functionality.

Controlling DME Satellite’s internal head amps from a digital mixer

The internal head amp settings of a DME8i-ES or DME4io-ES can be remotely controlled from a digital mixer

such as the Yamaha PM5D or DM2000.

Connect the digital mixer using a D-sub 9-pin cable to the AuviTran AVY16-ES interface card, and use Ether-

Sound to make connections between the AVY16-ES and DME series. Use an Ethernet cable connected to the

[NETWORK] connectors to make connections between DME series units.

The gain and the phantom power (+48V) can be controlled from the digital mixer.

NOTE

•Only one mixer can be connected within each device group.

• The digital mixer can be connected to any DME series unit, whether it is the group master or a slave unit.

• Control signal settings are made using AuviTran’s “AVS-ESMonitor” application software.

• The ID number of the DME series unit being remotely controlled is speciﬁed from DME Designer.

For details on making this setting, refer to the “DME Designer Owner’s Manual.”

•If the connection between DME series units is broken, it will no longer be possible to communicate with DME units of an

ID number that follows the disconnected DME.

•For details on controlling the head amps from a digital mixer not equipped with a [REMOTE] connector, refer to the

mixer’s owner’s manuals.

Digital Mixer

D-SUB 9-pin

Cable

Ethernet

Straight

Cable

Ethernet Cable

DME8i-ES

DME8i-ES

DME4io-ES

DME4io-ES

Ethernet

Cable

Switching

Hub

EtherSound

Ethernet

Ethernet Switching Hub

Hub

AVY16-ES AVY16-ES

Contents

Main Explanation of Graphical Symbols IMPORTANT SAFETY INSTRUCTIONS CAUTION 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! FCC INFORMATION (U.S.A.) Connecting the Plug and Cord IMPORTANT NOTICE FOR THE UNITED KINGDOM COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) PRECAUTIONS 1/2 Do not open PLEASE READ CAREFULLY BEFORE PROCEEDING CAUTION 2/2 Backup battery Connections Handling caution Foreword .......................................... 7 References....................................... 32 Other Functions.................................. 31 Contents Turning the power on and off 2. Foreword Differences between DME8i-ES, DME8o-ES, and DME4io-ES 5. 4. Introduction to the DME Satellite Audio System Network User Dened buttons (User Dened parameters) Conguration Components and parameters Scene Scene change Scene structure Signal Types Control signals between devices outside the device group Control signals within a device group Audio System Examples Multiple DME Satellite units: Large-scale system Space D Space B Space A Space C About DME Designer Front Panel Controls and Connectors Page Rear Panel Precautions for Using a Rack-mounted DME Satellite USB Connection Connecting to a Computer Network Settings Setting the IP address Master and slave setting Ethernet Connection ([NETWORK] Connector) Control from a computer in the same subnet group Device Group Control from a computer with a different subnet Device Group Connecting multiple device groups Device Group 1 Device Group 2 Digital Audio Connection (EtherSound Connectors) Audio I/O Connection Analog Audio Connection ([INPUT] & [OUTPUT] Connectors) Cable preparation Euroblock plug connection 1. 2. 3. Connecting to an External Device Controlling a DME Satellites internal head amps from a digital mixer Controlling the DME Satellite from an external device EtherSound Connection (EtherSound Connectors) Controlling DME Satellites internal head amps from a digital mixer Network Connection ([NETWORK] Connectors) GPI Connection ([GPI] Connector) Initializing the DME Satellite 1. 2. Other Functions Options ICP1 CP4SW, CP4SF, and CP1SF References Troubleshooting Component Refer to the DME Designer Owners Manual for more information on each component. MIDI Data Format 1. MIDI functions on the DME8i-ES, DME8o-ES, and DME4io-ES 2. MIDI Data Flow 3. MIDI Setup 4. MIDI Format Page MIDI Implementation Chart Foreword Introduction to References Connecting to an Display Messages Warning Messages Error Messages Indicator Error Action Indicator Error Action General Specifications Electrical Characteristics Page Page Input/Output Characteristics [NETWORK] Connector (100Base-TX Ethernet, RJ-45) Dimensions Index A C D E MEMO CANADA U.S.A. MEXICO BRAZIL NORTH AMERICA CENTRAL & SOUTH AMERICA EUROPE AFRICA MIDDLE EAST ASIA OCEANIA