◆Connecting to a computer
Important
•Make sure that the power of the projector and that of the computer are turned off.
•When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor.
•This projector may not display any image or not operate correctly depending on the computer you wish to connect. In such cases, refer to the instruction manual of the connected computer.
To
1
To monitor port
For analog connections:
1. | Connect one end of the supplied RGB cable to the |
| terminal of this projector. |
2. | Connect the other end of the RGB cable to the monitor port |
| of the computer. |
| • Additional devices, such as a conversion connector and an |
| analog RGB output adapter, are required depending on the type |
HDMID-SUB
2
RGB cable
COMPONENT
Y PB/CB PR/CR
of the computer to be connected. |
• This projector does not support |
GREEN signals). |
SERIAL USB
TRIGGER
VIDEO
To HDMI terminal
1
2
To DVI terminal
For digital connections:
1. | Connect one end of a commercially available |
| conversion cable to the HDMI terminal of this projector. |
2. | Connect the other end of the |
| the DVI terminal of the computer. |
| • Additional devices, such as a conversion connector and an |
| analog RGB output adapter, are required depending on the type |
| of the computer to be connected. |
| • When viewing images being input from a |
| COMPONENT |
HDMI | Y PB/CB PR/CR |
SERIAL | |
USB | |
| TRIGGER |
| VIDEO |
computer, press the HDMI button on the remote control. |
• Turn on the power of the projector before that of the computer. |
• Using a long cable may decrease the quality of projected |
images. |
• The signal input from the HDMI terminal does not output |
through the |
14