11 Replacing the lamp

This projector is equipped with a lamp to project images. This lamp is a consumable, so it may burn out or its brightness may decrease during use. If this happens, replace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new, commercially available lamp that is exclusive to this projector. Contact your dealer for purchase of the lamp.

Warning

This product contains a high intensity lamp that contains a small amount of mercury. Disposal of this material may be regulated due to environmental considerations. For disposal information in the United States, refer to the Electronic Industries Alliance web site: www.eiae.org

Be careful not to drop the lamp screws into the projector. Do not put a metal piece or flammable object into the projector. Using the projector with any foreign object present inside may result in electric shock or fire. If you can’t remove the foreign object from the inside, contact your dealer for removal.

Be sure to install the lamp securely. If the lamp is not installed properly, it will not illuminate. Improper installation may also result in fire.

Do not shake the removed lamp or lift it above your face. You may injure your eye by flying or falling glass fragments.

Do not replace the lamp immediately after use because the lamp cover is very hot. You may get burned. Turn off the power using the STANDBY/ON button. After the lamp goes out, wait about two minutes until the intake and exhaust fans for cooling the lamp stop rotating. Then unplug the power cable, and wait at least one hour to allow the lamp to cool down enough to the touch.

Interval of lamp replacement

The recommended interval of lamp replacement is about 3000 hours* of consecutive use when the LAMP MODE in the SETUP menu is set to CINEMA. Such interval differs depending on the operating environment and may be shorter than 3000 hours*. Decrease in luminescence and/ or color brightness indicates that the lamp needs to be replaced. When the lamp operation time exceeds 2250 hours, the indicator will blink alternately between green and red (while the lamp is lit; when the lamp is not lit, the indicator will be lit red only) and the lamp replacement message will appear on the screen for one minute everytime the lamp is turned on. When the lamp has been used for about 2850 hours, the replacement message (LAMP EXCHANGE) will appear on the screen for one minute every 15 hours thereafter.

When the lamp operation time exceeds 3000 hours*, the projector automatically shuts off and can not be used until the lamp is replaced and the lamp operation time is reset.

*When the LAMP MODE is set to STANDARD, this duration will be decreased to 2000 hours.

Caution

Be sure to use the replacement lamp cartridge PJL-725. Other lamp cartridges are not suitable for use in this projector.

Do not remove the lamp for any purpose other than replacement. Unnecessary removal of the lamp may result in a breakdown.

This projector uses a high-pressure mercury lamp as the light source. The high-pressure mercury lamp may explode or fail to illuminate permanently because of an impact, scratch, or deterioration through use. The period of time until explosion or permanent failure to illuminate varies considerably from lamp to lamp, depending on operation conditions. Therefore, the lamp may explode soon after the start of use.

The possibility of explosion of the lamp increases if you use it beyond its replacement period. When the lamp replacement warning appears, replace it with a new one immediately, even if the lamp is still lighting normally.

When the high-pressure mercury lamp explodes, glass fragments will scatter inside or outside the lamp box and the gas charged inside the lamp will diffuse inside or outside the projector. The gas inside the lamp contains mercury. Be careful not to breathe it and avoid it from entering your eye or mouth. If you should breathe it or if it should enter your eye or mouth, see a doctor immediately.

In the event that the high-pressure mercury lamp has exploded, glass fragments may have been scattered inside the projector. Ask your dealer to replace the lamp and to inspect the inside of the projector. When you clean or replace the lamp by yourself, be sure to hold the handle of the lamp. You may get injured by glass fragments.

Do not replace the lamp with the projector installed on the ceiling. Glass fragments may fall from the projector, entering your eye or mouth and causing injury.

When placing the projector upside down to replace the lamp or conduct maintenance, be sure that the projector is securely placed before working with it.

Replacement lamp cartridge (Option)

Spare lamp

PJL-725

32

Page 36
Image 36
Yamaha DPX-830 owner manual Replacing the lamp, Interval of lamp replacement, Replacement lamp cartridge Option, Spare lamp

DPX-830 specifications

The Yamaha DPX-830 is a sophisticated digital projector designed to meet the demands of various audiovisual applications, including home theaters, corporate presentations, and educational environments. Renowned for its high-quality image projection and advanced technological features, the DPX-830 provides a seamless user experience and impressive performance.

One of the standout features of the Yamaha DPX-830 is its high-resolution imaging capability. It offers a native resolution of 1920 x 1080 pixels, also known as Full HD. This ensures that visuals are sharp and detailed, making it perfect for displaying high-definition content. With a brightness rating of 3000 ANSI lumens, the projector performs well even in well-lit environments, ensuring vibrant colors and clear images without significant loss of quality.

The DPX-830 utilizes advanced DLP technology, which offers superior color reproduction and contrast ratios, resulting in deep blacks and vibrant colors. The use of a lamp life of up to 4000 hours reduces maintenance hassles and operating costs, making it an economical choice for users.

Another significant characteristic of the Yamaha DPX-830 is its versatile connectivity options. It features multiple input ports, including HDMI, VGA, and composite video, allowing users to easily connect various devices such as laptops, Blu-ray players, and streaming devices. This flexibility makes it an ideal choice for both personal and professional use.

In terms of audio capabilities, the DPX-830 is equipped with built-in speakers that deliver clear sound, enhancing the overall presentation experience. For users seeking enhanced audio performance, the projector can be connected to external sound systems via audio output ports.

The projector also includes a user-friendly interface that simplifies the setup and operation process. Features like automatic keystone correction and optical zoom facilitate easy adjustments to fit different projection environments. Its compact and lightweight design ensures that it can be easily transported, making it suitable for mobile presentations.

Overall, the Yamaha DPX-830 combines high-resolution imagery, DLP technology, versatile connectivity, and user-friendly operation, making it an excellent choice for anyone seeking a reliable and high-performing projector. Whether in a home theater setting or professional environment, the DPX-830 stands out as a powerful tool for delivering captivating visual content.